YingZhou Industrial Automation | Product Information
Delta ASD-E3-0721-L ASDA-E3 AC Servo Drive
750 W | 220 V Class | 1/3-Phase 200-230 VAC | RS-232 / RS-485 Modbus
| Specification |
Product Data |
| Brand |
Delta Electronics |
| Exact Model |
ASD-E3-0721-L |
| Series |
ASDA-E3 |
| Product Type |
AC Servo Drive |
| Rated Motor Capacity |
750 W / 0.75 kW |
| Voltage Class |
220 V Class |
| Main Circuit Input Phase |
Single-Phase / Three-Phase |
| Main Circuit Input Voltage |
200-230 VAC |
| Input Frequency |
50/60 Hz |
| Rated Input Current, Three-Phase |
3.33 A (Manufacturer Catalogue) |
| Rated Input Current, Single-Phase |
6.37 A |
| Continuous Output Current |
5.1 A |
| Maximum Instantaneous Output Current |
14.14 A |
| Communication |
RS-232 / RS-485 Modbus |
| Communication Interface |
RS-232 / RS-485 |
| Communication Protocol |
Modbus |
| Communication Connector |
CN3 |
| RS-232 Interface Pins |
TX Pin 2 / RX Pin 4 |
| RS-485 Interface Pins |
Positive Pin 5 / Negative Pin 6 |
| EtherCAT Communication |
Not Supported on E3-L |
| External Pulse Train Input |
Supported |
| Pulse Input Types |
Pulse + Direction / A-B Phase / CW-CCW |
| Maximum Differential Pulse Input |
Up to 4 Mpps |
| Open Collector Pulse Input |
Up to 200 Kpps |
| Internal PR Positioning |
Not Supported on E3-L |
| Control Modes |
Position / Speed / Torque |
| Analog Speed / Torque Commands |
Supported |
| Digital Inputs |
9 |
| Digital Outputs |
6 |
| Drive Resolution |
24-bit |
| Main Circuit Control |
SVPWM |
| Speed Loop Bandwidth |
Up to 2.5 kHz |
| Tuning Methods |
Automatic / Manual |
| Built-In Regenerative Resistor |
100 Ohm, 40 W |
| Regenerative Processing Capacity |
20 W |
| Minimum External Regenerative Resistance |
60 Ohm |
| Enclosure Protection |
IP20 |
Product Overview
The Delta ASD-E3-0721-L is a
750 W AC servo drive from Delta's
ASDA-E3 Series.
This 220 V class drive supports
single-phase or three-phase 200-230 VAC
main circuit input and provides
RS-232 / RS-485 Modbus communication
through the CN3 interface.
The E3-L version is designed for external pulse train
position commands and supports speed and torque control
with compatible Delta ECM-E3 servo motors.
Key Product Features
-
750 W Rated Servo Capacity for compatible industrial servo motor systems
-
220 V Class Power Input with single-phase or three-phase 200-230 VAC supply
-
RS-232 / RS-485 Modbus Communication through the CN3 serial interface
-
External Pulse Train Control for compatible PLC and motion controller position commands
-
Position, Speed and Torque Control with supported analog command inputs
-
9 Digital Inputs and 6 Digital Outputs for supported servo control functions
-
High-Speed Pulse Input supporting differential commands up to 4 Mpps
-
Built-In Regenerative Resistor rated at 100 Ohm and 40 W
-
ASDA-E3 Pulse Input Configuration for industrial positioning and drive control applications
Actual Product Verification
✓
Actual product photos
✓
Model/nameplate visible
✓
Packaging shown
✓
Device and carton labels match model ASD-E3-0721-L
✓
Actual device nameplate specifies 3.42 A three-phase input current
✓
Verify exact model before ordering
In Stock & Ready to Order
Delta ASD-E3-0721-L is currently
in stock.
Actual product photos, the exact model nameplate
and matching carton label are available for verification.
Contact us for project pricing, quantity requirements
and shipping arrangements.
IN STOCK
Delta ASD-E3-0721-L
Add to Cart / Buy Now on this product page,
or contact us for project and quantity pricing.
Request Project Pricing
