Danfoss
Danfoss 060G1866 MBS 3250 Pressure Transmitter 0-60 Bar 4-20mA
Danfoss 060G1866 MBS 3250 Pressure Transmitter 0-60 Bar 4-20mA
Не удалось загрузить сведения о доступности самовывоза
Danfoss 060G1866 MBS 3250 Pressure Transmitter
| Specification | Product Data |
|---|---|
| Manufacturer | Danfoss |
| Brand | Danfoss |
| Product Series | MBS 3250 |
| Exact Code Number | 060G1866 |
| Product Type | Industrial Pressure Transmitter |
| Measuring Principle | Electronic Pressure Measurement |
| Pressure Measuring Range | 0–60 bar |
| Pressure Reference | Gauge / Relative |
| Output Signal | 4–20 mA |
| Output Configuration | 2-Wire Current Loop |
| Supply Voltage | 9–32V DC |
| Typical Accuracy | ±0.5% FS |
| Maximum Accuracy Error | ±1.0% FS |
| Non-Linearity BFSL | ≤ ±0.2% FS |
| Hysteresis and Repeatability | ≤ ±0.1% FS |
| Response Time — Liquids | Less than 4 ms (viscosity below 100 cSt) |
| Response Time — Air/Gases | Less than 35 ms |
| Integrated Pulse Snubber | Yes |
| Electrical Connection | EN 175301-803-A, Pg 9 |
| Pressure Connection | G 1/4 DIN 3852-E |
| Pressure Connection Type | Male Thread |
| Protection Rating | IP65 with Mating Connector |
| Sensor Operating Temperature | −40 to +100°C |
| Media Temperature Range | −40 to +125°C |
| Ambient Temperature Range | −40 to +100°C |
| Compensated Temperature Range | 0 to +100°C |
| Storage Temperature | −50 to +125°C |
| Wetted Parts Material | Stainless Steel AISI 316L |
| Enclosure Material | Stainless Steel AISI 316L |
| Electrical Polarity Protection | Yes |
| Short-Circuit Protection | Yes |
| Typical Applications | Hydraulic Systems, Pumps, Industrial Machinery |
| Product Availability | IN STOCK |
Product Overview
The Danfoss 060G1866 is a MBS 3250 industrial pressure transmitter designed for reliable pressure measurement in hydraulic systems and demanding industrial applications. This exact model belongs to the Danfoss MBS 3250 series, a family of compact heavy-duty pressure transmitters engineered for applications where vibration, pressure pulsation, cavitation and transient pressure peaks can affect measurement performance. The 060G1866 provides a manufacturer-specified measuring range of 0–60 bar using a gauge or relative pressure reference. It converts the measured pressure into a standard 4–20 mA analog current signal suitable for compatible industrial PLC analog input modules, process controllers and monitoring equipment. The transmitter uses a two-wire current-loop configuration and operates from a 9–32V DC power supply. The MBS 3250 design incorporates an integrated pulse snubber, which helps reduce the influence of cavitation, liquid hammer and sudden pressure peaks in hydraulic applications. This feature is particularly relevant to industrial systems involving pumps, hydraulic power units, actuators and equipment exposed to changing fluid pressure conditions. The transmitter offers a typical measurement accuracy of ±0.5% of full scale, with a manufacturer-specified maximum accuracy error of ±1.0% of full scale. The electronic measuring system is designed for stable industrial pressure monitoring and provides a response time of less than 4 milliseconds for liquids with viscosity below 100 cSt. For air and gas applications, the specified response time is less than 35 milliseconds. The 060G1866 uses a G 1/4 male pressure connection conforming to DIN 3852-E and an EN 175301-803-A Pg 9 angular electrical connection. These connection specifications should be checked carefully when replacing an existing pressure transmitter or designing a new industrial installation. The transmitter features stainless steel AISI 316L wetted components and enclosure construction, supporting durability in appropriately selected industrial media and environments. The specified media temperature range is −40 to +125°C, while the sensor operating and ambient temperature range for this 4–20 mA configuration is −40 to +100°C. The electrical connector arrangement provides an IP65 protection rating when the appropriate mating connector is properly installed. The MBS 3250 series is designed for demanding industrial and hydraulic applications requiring compact construction, vibration stability and reliable analog pressure measurement. Typical applications include hydraulic machinery, pump systems, industrial equipment, pressure monitoring circuits and maintenance replacement requirements. The actual product and its Danfoss packaging have been photographed, and both visible labels identify the model as MBS 3250, code number 060G1866. The photographed labels also confirm the 0–60 bar pressure range and 4–20 mA output signal. Before purchasing, buyers should verify the exact Danfoss code number, pressure range, output signal, power supply requirements, G 1/4 process connection, Pg 9 electrical connection and compatibility with the intended pressure medium. The transmitter is a continuous analog pressure measurement device and should not be confused with a mechanical or electronic pressure switch. Installation, electrical wiring, sealing and media compatibility should follow the official Danfoss technical documentation.
Key Product Features
- Danfoss MBS 3250 Series — Heavy-duty industrial pressure transmitter designed for hydraulic and industrial pressure monitoring applications.
- Exact Code Number 060G1866 — Manufacturer-specified pressure transmitter with a 0–60 bar measuring range.
- 4–20mA Analog Output — Standard industrial current-loop signal for compatible PLCs, controllers and monitoring systems.
- 9–32V DC Supply — Supports industrial DC power supply applications within the specified voltage range.
- Integrated Pulse Snubber — Helps reduce the influence of cavitation, liquid hammer and pressure peaks.
- G 1/4 Pressure Connection — DIN 3852-E threaded connection for compatible hydraulic installations.
- Pg 9 Electrical Connector — EN 175301-803-A angular electrical connection.
- Typical ±0.5% FS Accuracy — Supports reliable industrial pressure measurement.
- Stainless Steel Construction — AISI 316L enclosure and wetted components for demanding industrial environments.
- High Media Temperature Capability — Suitable for specified media temperatures from −40 to +125°C.
- IP65 Enclosure Protection — Protection rating applies with the appropriate mating electrical connector installed.
- Actual Product Photography — Physical pressure transmitter and matching Danfoss packaging photographed for model identification.
Actual Product Verification
In Stock & Available to Order
Danfoss 060G1866 MBS 3250 is marked in stock based on the supplied inventory information. Actual photographs of the pressure transmitter and its matching Danfoss packaging are available for model identification. This industrial pressure transmitter features a 0–60 bar measuring range, 4–20 mA analog output, 9–32V DC supply, integrated pulse snubber, G 1/4 DIN 3852-E pressure connection and EN 175301-803-A Pg 9 electrical connector. It is designed for compatible industrial hydraulic systems, pressure monitoring applications, pump equipment and maintenance replacement requirements. Please confirm the required quantity, pressure range, output signal, process connection, electrical connection and delivery destination before purchasing. Additional accessories and installation materials are not confirmed as included.
Danfoss 060G1866 MBS 3250
Contact us for exact-model confirmation, industrial automation sourcing and bulk pricing. Please confirm the required quantity, pressure range, electrical configuration and delivery destination before ordering.
Request Bulk PricingLooking for other Danfoss pressure transmitters and industrial automation components?
Explore Danfoss Industrial Automation ProductsShare
