YingZhou Industrial Automation | Product Information
Schneider Electric LXM32MD72N4 Lexium 32M Modular AC Servo Drive
3-Phase | 5kW at 208V | 7kW at 400/480V | 24A Continuous | 72A Peak
| Specification |
Product Data |
| Brand |
Schneider Electric |
| Exact Model |
LXM32MD72N4 |
| Series |
Lexium 32 / Lexium 32M |
| Device Short Name |
LXM32M |
| Product Type |
Motion Servo Drive |
| Drive Format |
Modular / Book |
| Input Supply Phases |
3-Phase AC |
| Rated Supply Voltage |
200–240 V AC / 380–480 V AC (-15%/+10%) |
| Supply Voltage Limits |
170–264 V / 323–528 V AC |
| Supply Frequency |
50/60 Hz (±5%) |
| Network Frequency |
47.5–63 Hz |
| Nominal Power at 208V |
5 kW at 8 kHz |
| Nominal Power at 400V |
7 kW |
| Nominal Power at 480V |
7 kW at 8 kHz |
| Continuous Output Current |
24 A at 8 kHz |
| Peak Output Current |
72 A for 5 Seconds |
| Maximum Continuous Power at 208V |
6.5 kW |
| Maximum Continuous Power at 400V |
13 kW |
| Maximum Continuous Power at 480V |
13 kW |
| Line Current at 208V |
21.9 A, Without Line Choke |
| Line Current at 400V |
17.3 A, Without Line Choke |
| Line Current at 480V |
14.6 A, Without Line Choke |
| Switching Frequency |
8 kHz |
| Integrated EMC Filter |
Yes |
| Output Voltage |
Less Than or Equal to Supply Voltage |
| Electrical Isolation |
Between Power and Control |
| Overvoltage Category |
III |
| Integrated Communication |
Modbus |
| Communication Interface |
RS485, RJ45 CN7 |
| Modbus Transmission Rate |
9,600 / 19,200 / 38,400 bps |
| Modbus Address Range |
1–247 |
| Optional Communication |
PROFINET via Separate Communication Card |
| Discrete Capture Inputs |
2 |
| Capture Input Voltage |
24 V DC |
| Discrete Outputs |
3 Logic Outputs |
| Discrete Output Voltage |
Up to 30 V DC |
| Control Signal Type |
PTO, RS422, Less Than 500 kHz |
| Integrated Safety Function |
STO — Safe Torque Off |
| STO Safety Level |
SIL 3, EN/IEC 61508 |
| Status Indication |
Red LED and 7-Segment Fault Display |
| Cooling Type |
Integrated Fan |
| Operating Position |
Vertical ±10° |
| Width |
108 mm |
| Height |
270 mm |
| Depth |
237 mm |
| Degree of Protection |
IP20 |
| Operating Temperature |
0°C to +50°C without Derating |
| Derated Operating Temperature |
+50°C to +60°C, 2.2%/°C Derating |
| Storage Temperature |
-25°C to +70°C |
| Relative Humidity |
5–85%, Non-Condensing |
| Operating Altitude |
Up to 1,000 m without Derating |
| EMC Standard |
EN/IEC 61800-3 |
| GTIN / EAN |
3606480216244 |
| Country of Origin |
Indonesia |
| Manufacturer Package Quantity |
1 Piece |
Product Overview
The Schneider Electric LXM32MD72N4
is a three-phase modular motion servo drive from
the Lexium 32M range.
It supports 200–240V AC and
380–480V AC supply classes,
with a nominal power rating of
5kW at 208V and
7kW at 400V or 480V.
The drive provides
24A continuous output current at 8kHz
and a 72A peak output current for 5 seconds.
Its modular design incorporates
Modbus RS485 communication,
an integrated EMC filter,
STO (Safe Torque Off),
a diagnostic display and an integrated cooling fan.
The LXM32MD72N4 is designed for use with
Schneider-approved servo motor and feedback
configurations in industrial motion control systems.
This listing is for the servo drive only.
The compatible motor, cables and optional
communication accessories must be selected
according to the required application.
Key Product Features
-
Lexium 32M modular motion servo drive for three-phase industrial motion control
-
5kW at 208V and 7kW at 400/480V nominal power ratings
-
24A continuous output current at an 8kHz switching frequency
-
72A peak output current for up to 5 seconds
-
Integrated Modbus RS485 communication with modular communication expansion
-
Integrated Safe Torque Off (STO) safety function
-
Integrated EMC filter and fan cooling for industrial cabinet installations
-
7-segment fault display for drive diagnostics and maintenance
Actual Product Verification
✓
Actual product photos
✓
Exact model and electrical nameplate visible
✓
Schneider packaging shown with model LXM32MD72N4
✓
Verify exact model LXM32MD72N4,
input voltage, power rating and compatible
servo motor before ordering
In Stock & Ready to Order
Schneider Electric LXM32MD72N4
is currently reported in stock.
Actual product nameplate and Schneider packaging
photos are available for buyer verification.
This Lexium 32M modular AC servo drive
supports three-phase supply configurations,
with 5kW at 208V or
7kW at 400/480V.
It delivers 24A continuous output
and up to 72A short-duration peak current.
Integrated Modbus communication, STO and
forced-air cooling support industrial
servo control applications.
This listing is for the drive only.
Please confirm the exact model,
input voltage, motor compatibility, feedback
and required order quantity before purchasing.
Contact our team for international
shipping arrangements.
IN STOCK
Schneider Electric LXM32MD72N4
Order online or contact us for project and quantity pricing.
Request Project Pricing
