• Telemecanique XCE110C OsiSense XC Metal Plunger Limit Switch-YingZhou Automatization
  • Telemecanique XCE110C OsiSense XC Metal Plunger Limit Switch-YingZhou Automatization
  • Telemecanique XCE110C OsiSense XC Metal Plunger Limit Switch-YingZhou Automatization
  • Telemecanique XCE110C OsiSense XC Metal Plunger Limit Switch-YingZhou Automatization
  • Telemecanique XCE110C OsiSense XC Metal Plunger Limit Switch-YingZhou Automatization
  • Telemecanique XCE110C OsiSense XC Metal Plunger Limit Switch-YingZhou Automatization
  • Telemecanique XCE110C OsiSense XC Metal Plunger Limit Switch-YingZhou Automatization
1 7

Telemecanique

Telemecanique XCE110C OsiSense XC Metal Plunger Limit Switch

Telemecanique XCE110C OsiSense XC Metal Plunger Limit Switch

$8.99 USD
$8.99 USD
Aanbieding Uitverkocht
Model Number
YingZhou Industrial Automation | Product Information

Telemecanique Sensors XCE110C Metal Plunger Limit Switch

OsiSense XC | Steel End Plunger | 1NO + 1NC | Snap Action | IP65
✓ IN STOCK & AVAILABLE TO ORDER  |  Actual Product Photos  |  Exact Model Verified
Specification Verified Product Data
Manufacturer Telemecanique Sensors
Catalog Number XCE110C
Product Family OsiSense XC
Series Name Basic
Device Short Name XCE
Product Type Electromechanical Limit Switch
Application Duty Medium Duty
Body Type Fixed
Head Type Plunger Head
Operating Head Movement Linear
Operator Type Spring Return Steel End Plunger
Steel Plunger Diameter 7mm (Manufacturer Catalog)
Switch Actuation On End
Type of Approach Vertical Approach, One Direction
Contact Configuration 1NO + 1NC
Contact Insulation Form Za
Number of Poles 2
Contact Operation Snap Action
Positive Opening Operation Without Positive Opening
Normally Closed Terminals 1-2
Normally Open Terminals 3-4
Maximum Tripping Force 9N
Minimum Release Force 1.5N
Minimum Actuation Speed 5mm/s
Maximum Actuation Speed 0.5m/s
Maximum Operating Rate 120 Cycles/min
AC Contact Utilization Category A300
AC Rated Operational Current 3A at 240V AC
DC Contact Utilization Category R300
DC Rated Operational Current 0.3A at 220V DC
Conventional Thermal Current 10A
Rated Insulation Voltage 300V (Actual Product Label)
Rated Impulse Withstand Voltage 4kV
Electrical Durability 800,000 Cycles at 220V AC / 3A
Mechanical Durability 10,000,000 Cycles
Electrical Connection Screw-Clamp Terminals
Terminal Clamping Capacity 1 x 1.5mm²
Cable Entry Flexible Rubber Cable Gland
Cable Outer Diameter 6-9mm
Body Material Plastic and Metal
Mounting Method By the Body
Protection Rating IP65
Operating Temperature -25°C to +70°C
Storage Temperature -40°C to +70°C
Shock Resistance 30gn for 11ms
Vibration Resistance +/-3mm at 10-55Hz
Product Width 28mm
Product Height 100mm
Product Depth 25mm
Net Weight 0.11kg
Applicable Standard IEC 60947-5-1
Additional Standard GB 14048.5
Manufacturer Markings CE / CCC
Packaging Model XCE110C
Packaging Quantity 1 Piece
Packaging Barcode 3606481499196
Country of Manufacture Made in China (Actual Packaging)

Product Overview

The Telemecanique Sensors XCE110C is an OsiSense XC Series electromechanical limit switch designed for medium-duty industrial position and end-of-travel detection applications. It features a spring-return steel end plunger with linear operating movement and vertical actuation from one direction. The switch uses a snap-action contact mechanism with one normally open (1NO) and one normally closed (1NC) contact, suitable for compatible industrial control circuits. The XCE110C has a manufacturer-specified maximum tripping force of 9N, a minimum release force of 1.5N and a maximum operating rate of 120 cycles per minute. Its contact ratings include A300, 3A at 240V AC and R300, 0.3A at 220V DC under the specified utilization categories. The IP65 enclosure is designed for appropriate industrial environments and operates over an ambient temperature range of -25°C to +70°C. Electrical connections are made through screw-clamp terminals with a flexible rubber cable gland suitable for cable outer diameters of 6-9mm. The compact switch measures 28 x 100 x 25mm and weighs approximately 0.11kg. The XCE110C is intended for mechanical position detection and does not incorporate a positive-opening contact mechanism. The supplied actual photographs show a Telemecanique Sensors limit switch and manufacturer packaging both marked XCE110C, confirming the exact model identification. Functional operation and contact switching have not been independently tested.

Key Product Features

  • OsiSense XC Electromechanical Limit Switch — Telemecanique XCE110C for medium-duty industrial position detection.
  • Spring Return Steel End Plunger — Linear plunger operating mechanism with direct end actuation.
  • 1NO + 1NC Snap-Action Contacts — Normally open and normally closed contacts for machine position and travel signalling.
  • IP65 Industrial Enclosure — Protection against dust and water jets under specified installation conditions.
  • 9N Maximum Tripping Force — Manufacturer-specified operating force with a minimum release force of 1.5N.
  • 10 Million Mechanical Operations — Manufacturer-rated mechanical endurance for suitable industrial applications.
  • Industrial Screw-Clamp Connection — Flexible rubber cable gland supports 6-9mm outer-diameter cables.

Actual Product Verification

✓ Actual product and packaging photographs supplied
✓ Manufacturer branding: Telemecanique Sensors
✓ Packaging catalog number: XCE110C
✓ Product nameplate catalog number: XCE110C
✓ Packaging and product model numbers match exactly
✓ Packaging quantity: 1 Piece
✓ Packaging barcode: 3606481499196
✓ Packaging traceability reference: 8A-2026-W04
✓ Product photograph shows a spring-return end-plunger operating head
✓ Product nameplate identifies IP65 protection
✓ Product nameplate shows 240V AC / 3A and 220V DC / 0.3A ratings
✓ Manufacturer data confirms 1NO + 1NC snap-action contacts
✓ Product packaging identifies Made in China
✓ Confirm mechanical plunger operation and electrical contact condition before dispatch

In Stock & Available to Order

Telemecanique Sensors XCE110C is marked in stock based on the supplied inventory information. This OsiSense XC spring-return steel end-plunger limit switch is available for industrial machinery maintenance, position detection, equipment replacement and project sourcing inquiries. The supplied product and packaging photographs both confirm the exact XCE110C catalog number. The switch features 1NO + 1NC snap-action contacts, an IP65 enclosure and a 9N maximum tripping force. Please confirm the contact configuration, mounting dimensions, plunger operation, cable specifications, required quantity and dispatch arrangements before completing an order.

IN STOCK

Telemecanique Sensors XCE110C

Contact us for exact-model verification, multiple units and project sourcing. Please confirm the metal end-plunger configuration, 1NO+1NC contacts, 9N tripping force, IP65 protection and installation requirements before ordering.

Request Bulk Pricing

Looking for other Telemecanique Sensors industrial automation products?

Explore Telemecanique Sensors Industrial Products
Alle details bekijken

PRODUCT CATEGORY