Ga direct naar productinformatie
1 van 7

OPTEX FA

OPTEX FA CD33-50NA CD33 50±10mm 4–20mA NPN Laser Displacement Sensor

OPTEX FA CD33-50NA CD33 50±10mm 4–20mA NPN Laser Displacement Sensor

Normale prijs $528.99 USD
Normale prijs Aanbiedingsprijs $528.99 USD
Aanbieding Uitverkocht
Model Number
YingZhou Industrial Automation | Product Information

OPTEX FA CD33-50NA CD33 Laser Displacement Sensor

50 ±10mm | 4–20mA | NPN 2ch | Class 2 Laser | IP67
✓ IN STOCK & AVAILABLE TO ORDER  |  Actual Product Photos  |  Exact Model Verified
Specification Verified Product Data
Manufacturer OPTEX FA Co., Ltd.
Catalog Number CD33-50NA
Product Family CD33 Series
Product Type CMOS Laser Displacement Sensor
Detection Method Diffuse-Reflective
Measurement Center Distance 50 mm
Measurement Range ±10 mm
Effective Measurement Distance 40–60 mm
Full Scale (F.S.) 20 mm
Repeat Accuracy 5 μm (8 μm in Fast mode)
Light Source Red Semiconductor Laser
Laser Wavelength 655 nm
Maximum Laser Output 1 mW
Laser Classification IEC/JIS Class 2
Analog Output 4–20 mA
Analog Load Impedance 300 Ω or Less
Control Output 2 Channels, NPN Open Collector
Control Output Rating Max. 100 mA / 30 VDC
Supply Voltage 12–24 VDC (Manufacturer Tolerance Applies)
Sampling Period 0.5 ms Default; Selectable
Connection Type Integrated Cable
Cable Length 2 m
Degree of Protection IP67
Operating Temperature −10 to +45°C
Operating Humidity 35–85% RH, No Condensation
Warm-Up Time Approx. 15 Minutes
Housing Material PBT
Front Cover Material PMMA
Approximate Weight 65 g, Excluding Cable

Product Overview

The OPTEX FA CD33-50NA is a CD33 Series compact CMOS laser displacement sensor designed for non-contact displacement and distance measurement in industrial automation applications. It features a 50 mm measurement center distance with a ±10 mm measuring range, covering distances from 40 to 60 mm. The sensor provides 4–20 mA analog current output and two NPN open-collector control outputs for integration with compatible industrial controllers and measurement systems. The CD33-50NA uses a Class 2 red semiconductor laser with a wavelength of 655 nm and offers 5 μm repeat accuracy under specified measurement conditions. Its compact IP67 housing and integrated 2 m cable make it suitable for applications requiring non-contact position monitoring, dimensional inspection and displacement measurement. The supplied actual product photographs show the CD33-50NA model on both the packaging label and the sensor body.

Key Product Features

  • CD33 Series CMOS Sensor — Compact non-contact laser displacement measurement device.
  • 50 mm Measurement Center — Measuring range of ±10 mm, covering 40–60 mm.
  • 5 μm Repeat Accuracy — High-repeatability measurement under specified operating conditions.
  • 4–20 mA Analog Output — Analog current signal for compatible industrial controllers.
  • Two NPN Control Outputs — Open-collector switching outputs for control and monitoring.
  • Class 2 Red Laser — 655 nm semiconductor laser measurement system.
  • IP67 Cable-Type Design — Compact sensor housing with integrated 2 m cable.

Actual Product Verification

✓ Actual packaging and sensor body photographs supplied
✓ Packaging label model: CD33-50NA
✓ Sensor body label: CD33-50NA
✓ Packaging and sensor identification match the requested model
✓ Laser safety warning label is visible on the sensor housing
✓ Integrated cable and physical sensor appearance shown
✓ Made in Japan marking visible on the supplied packaging and sensor

In Stock & Available to Order

OPTEX FA CD33-50NA is marked in stock based on the supplied inventory information. Actual product photographs are available, with the CD33-50NA model clearly identifiable on both the packaging and sensor body. This CD33 Series laser displacement sensor is suitable for industrial maintenance, replacement and automation procurement requirements. Please confirm the 4–20 mA analog interface, NPN output configuration, measurement range and application requirements before ordering.

IN STOCK

OPTEX FA CD33-50NA

Contact us for exact-model confirmation, multiple units and project sourcing. Please confirm the 50 ±10 mm measurement range, 4–20 mA analog output, NPN control interface and installation requirements before ordering.

Request Bulk Pricing

Looking for other OPTEX FA industrial automation products?

Explore OPTEX FA Industrial Automation Products
Alle details bekijken