YingZhou Industrial Automation | Product Information
Delta DTE10T DTE Series Modular PID Temperature Controller
4 Thermocouple Inputs | Expandable to 8 | 24VDC | RS-485 Modbus | DIN Rail
| Specification |
Product Data |
| Brand |
Delta Electronics |
| Exact Model |
DTE10T |
| Series |
DTE Series |
| Product Type |
Modular Multi-Channel PID Temperature Controller |
| Module Role |
Main Temperature Controller |
| Standard Input Channels |
4 Thermocouple Inputs (INA / CH1-CH4) |
| Maximum Input Channels |
8 with Optional DTE20T Expansion Module |
| Optional Input Expansion |
DTE20T - Adds 4 Thermocouple Channels (INB) |
| Supported Thermocouple Types |
K, J, T, E, N, R, S, B, L, U, TXK |
| Default Input Type |
K-Type Thermocouple |
| Temperature Sampling Rate |
1 Second per Scan of All Inputs |
| Power Supply |
24VDC |
| Supply Voltage Range |
90-110% of Rated Voltage |
| Maximum Base Power Consumption |
10W |
| Power with DTC2000 Expansion |
Up to 10W + 3W per Connected DTC2000 |
| Maximum DTC2000 Expansion |
7 Compatible Controllers |
| Control Methods |
PID / Programmable PID / ON-OFF / Manual |
| PID Auto-Tuning |
Supported |
| Programmable Control |
8 Patterns / 8 Steps per Pattern |
| Temperature / Time Settings |
Up to 64 Settings |
| Optional Output Groups |
OUT1 / OUT2 / SUB1 / SUB2 |
| Output Module Requirement |
Compatible Output Modules Selected Separately |
| Optional Relay Output |
SPST, 250VAC / 3A Resistive Load |
| Optional Voltage Pulse Output |
12VDC, Maximum 40mA |
| Optional Current Output |
DC 4-20mA, Load below 500 Ohms |
| Optional Analog Voltage Output |
DC 0-10V, Load above 1000 Ohms |
| Maximum Modular Output Architecture |
Up to 16 Channels, Depending on Installed Modules |
| RS-485 Communication |
Built-in 2-Wire RS-485 |
| Communication Protocol |
Modbus ASCII / RTU |
| Communication Baud Rate |
2400-115200 bps |
| Synchronous Communication |
Supported |
| Automatic ID Setup |
Supported |
| Status Indicators |
PWR / RUN / COM / ERR LEDs |
| Extension Interface |
Built-in Extension Port |
| Optional Display / Setup Unit |
Supported |
| Installation |
DIN-Rail Mounting |
| Operating Temperature |
0°C to +50°C |
| Storage Temperature |
-20°C to +65°C |
| Operating Humidity |
35-85% RH, Non-Condensing |
| Maximum Operating Altitude |
Below 2000m |
| Vibration Resistance |
10-55Hz, 10m/s² |
| Shock Resistance |
Max. 300m/s² |
Product Overview
The Delta DTE10T is a
modular multi-channel PID temperature controller
from Delta's DTE Series, designed for
DIN-rail-mounted industrial temperature control systems.
The standard main unit provides
4 thermocouple input channels
supporting K, J, T, E, N, R, S, B, L, U and TXK sensor types.
A compatible DTE20T input expansion module
can increase the system capacity to
8 thermocouple channels.
DTE10T operates on a 24VDC power supply
with a 10W maximum base power rating.
It supports PID, programmable PID, ON-OFF and manual control,
together with built-in RS-485 Modbus ASCII / RTU
communication at baud rates up to 115,200bps.
Compatible output modules can be selected separately
according to the required relay, voltage pulse,
current or analog voltage control configuration.
Key Product Features
-
4 built-in thermocouple inputs
with expansion to 8 channels using an optional DTE20T module
-
24VDC supply
with 10W maximum base power consumption
-
Built-in RS-485 Modbus ASCII / RTU
communication up to 115,200bps
-
PID / Programmable PID / ON-OFF / Manual
temperature control with auto-tuning
-
Optional output modules
for relay, voltage pulse, 4-20mA and 0-10V applications
-
DIN-rail modular design
with built-in extension interface
-
Up to 7 compatible DTC2000 expansion controllers
with synchronous communication and automatic ID setup
Actual Product Verification
✓
Actual product photos
✓
Model/nameplate visible:
DTE10T
✓
Packaging label shown with matching model
✓
Actual nameplate:
DC 24V, 10W Max., V2.50
✓
INA input terminals, status indicators
and extension port visible
✓
Verify the exact model and required
optional I/O modules before ordering
In Stock & Ready to Order
Delta DTE10T is currently in stock.
Actual product and packaging photos are available
for buyer reference.
The standard controller has
4 thermocouple input channels.
Please confirm the exact model, required channel count,
thermocouple types, RS-485 communication,
power supply and optional output-module configuration
before ordering.
Additional DTE20T input modules, output modules
and other expansion accessories should be selected
separately according to system requirements.
