YingZhou Industrial Automation | Product Information
Delta CMM-EC03 EtherCAT Communication Option Card
Dual RJ45 | 100Mbps EtherCAT | CiA 402 | MS300 / MH300
| Specification |
Product Data |
| Brand |
Delta Electronics |
| Exact Model |
CMM-EC03 |
| Product Family |
M300 Series Communication Accessories |
| Product Type |
EtherCAT Communication Option Card |
| Compatible Drive Series |
Delta MS300 / MH300 |
| Network Protocol |
EtherCAT |
| Application Profile |
CANopen over EtherCAT (CoE) |
| Supported Drive Profile |
CiA 402 |
| Supported Operating Mode |
Velocity Mode |
| Network Interface |
RJ45 |
| Number of Ports |
2 |
| Port Designation |
IN / OUT |
| Transmission Standards |
IEEE 802.3 / IEEE 802.3u |
| Transmission Speed |
10 / 100Mbps Auto Detection |
| Recommended Communication Cable |
Shielded Category 5e |
| Maximum Cable Distance |
100m per Segment |
| Synchronization Mode |
Free Run (Asynchronous) |
| Process Data Object (PDO) |
Supported |
| Service Data Object (SDO) |
Supported |
| Emergency Object (EMCY) |
Supported |
| Drive Status Monitoring |
Supported through EtherCAT Services |
| Drive Parameter Read / Write |
Supported through SDO |
| Remote I/O Function |
Supported |
| Communication Disconnection Protection |
Supported |
| Dynamic Series Recognition |
Supported by CMM-EC03 |
| ESI File Integration |
EtherCAT Slave Information Supported |
| Operating Indicator |
RUN LED |
| Error Indicator |
ERR LED |
| Input Link Indicator |
L/A IN |
| Output Link Indicator |
L/A OUT |
| Ground Connection |
Ground Terminal Block |
| Card Power Supply |
15VDC Supplied by Compatible Drive |
| Power Consumption |
0.8W |
| Insulation Voltage |
500VDC |
| Approximate Weight |
27g |
| Operating Temperature |
-10°C to +50°C |
| Storage Temperature |
-25°C to +70°C |
| Operating Humidity |
Up to 90% RH |
| MS300 Firmware Requirement |
V1.07 or Later (2023 Manual) |
| MH300 Firmware Requirement |
V1.02 or Later (2023 Manual) |
| CMM-EC03 Firmware Requirement |
V2.04 or Later (2023 Manual) |
| Installation |
Compatible MS300 / MH300 Option Card Mounting Position |
| Matched Connection Cable |
Required, Selected by Drive Configuration |
| Standalone Network Device |
No - Drive Communication Accessory |
Product Overview
The Delta CMM-EC03 is an
EtherCAT communication option card
designed for compatible
Delta MS300 and MH300 Series AC motor drives.
It provides two RJ45 communication ports
for industrial EtherCAT networking with
100Mbps transmission.
The card supports the
CiA 402 drive profile and velocity mode,
together with PDO, SDO and emergency communication objects.
EtherCAT SDO services allow compatible controllers
to read drive status and access drive parameters.
Additional features include
remote I/O support, communication
disconnection protection and dynamic series recognition.
The CMM-EC03 uses
15VDC power supplied by the compatible drive
and has a rated consumption of 0.8W.
A matching communication-card connection cable
and appropriate drive firmware are required
for installation and commissioning.
Key Product Features
-
EtherCAT communication option card
for compatible Delta MS300 and MH300 AC drives
-
Dual RJ45 ports
with 100Mbps EtherCAT network communication
-
CiA 402 velocity mode
for supported drive-control applications
-
PDO and SDO communication
for data exchange, drive status monitoring
and parameter access
-
Dynamic series recognition
supported by CMM-EC03
-
Remote I/O and communication
interruption protection
supported by the EtherCAT card
-
Compact drive-powered module
with 15VDC supply from the compatible VFD
and 0.8W power consumption
Actual Product Verification
✓
Actual product photos
✓
Actual communication circuit board shown
✓
Packaging label visible:
CMM-EC03
✓
IN / OUT and communication status markings visible
on the circuit board
✓
PCB component layout shown for buyer reference
✓
Verify exact model, compatible drive,
firmware and required connection cable before ordering
In Stock & Ready to Order
Delta CMM-EC03 is currently in stock.
Actual product circuit board and packaging photos
are available for buyer reference.
Please confirm the exact model,
MS300 / MH300 drive compatibility,
the required EtherCAT protocol,
applicable drive and communication-card firmware,
mounting position and matching connection cable
before ordering.
