YingZhou Industrial Automation | Product Information
Siemens 5SY6206-7CV SENTRON Miniature Circuit Breaker
6A | 2-Pole | 400V AC | 10kA Icu at 400V | Industrial MCB
Product Overview
The Siemens 5SY6206-7CV is a
SENTRON miniature circuit breaker (MCB)
with a 2-pole configuration
and a 6A rated current.
The actual product is marked for
400V AC operation at
50/60Hz.
According to the photographed manufacturer
nameplate, the rated ultimate short-circuit
breaking capacity (Icu) is
10kA at 400V AC,
while the rated service short-circuit
breaking capacity (Ics) is
6kA at 400V AC.
The rear product label also identifies
20kA Icu and
15kA Ics at 230V AC.
The device carries
IEC / EN 60947-2
and GB/T 14048.2
standard markings and is identified
as utilization category A.
The Siemens packaging and the
product front both show the exact
catalog number 5SY6206-7CV,
supporting exact-model identification.
The packaging indicates a quantity
of one piece and origin marking
Made in CN.
Before installation or replacement,
verify the required rated voltage,
fault-current level, pole configuration,
tripping characteristic, upstream
protection and applicable electrical
installation requirements.
Key Product Features
-
Siemens SENTRON MCB — Miniature circuit breaker for low-voltage electrical protection.
-
6A Rated Current — Rated current indicated on the actual product.
-
2-Pole Construction — Two switching poles with a common operating handle.
-
400V AC, 50/60Hz — Voltage and frequency specified on the product marking.
-
10kA Icu at 400V AC — Rated ultimate short-circuit breaking capacity shown on the rear nameplate.
-
6kA Ics at 400V AC — Rated service short-circuit breaking capacity indicated by the manufacturer label.
-
IEC / EN 60947-2 — Electrical standard indicated on the device.
-
Compact Modular Design — Suitable for integration into compatible low-voltage electrical assemblies, subject to installation verification.
-
Exact Model Identification — Product and packaging both marked 5SY6206-7CV.
-
Actual Product Photos — Real photographs of the product front, rear nameplate and packaging label.
Actual Product Verification
✓ Actual Siemens product photographs supplied
✓ Product front model: 5SY6206-7CV
✓ Packaging model: 5SY6206-7CV
✓ Rated current marking: 6A
✓ Pole configuration: 2-Pole
✓ Voltage marking: 400V AC
✓ Icu at 400V AC: 10kA
✓ Ics at 400V AC: 6kA
✓ Packaging quantity: 1 Piece
✓ Origin marking: Made in CN
✓ Exact product and packaging catalog numbers match
Verification is based on supplied product
and packaging photographs.
Electrical operation has not been independently tested.
In Stock & Available to Order
Siemens 5SY6206-7CV
is marked in stock
according to the supplied inventory information.
This SENTRON miniature circuit breaker
features a 6A rated current,
2-pole construction,
and 400V AC marking.
Its rear nameplate specifies
10kA Icu and
6kA Ics at 400V AC.
Actual product and packaging photographs
are available to assist exact-model confirmation.
Buyers should verify the complete
part number, rated current, operating voltage,
required short-circuit rating,
tripping characteristic, and quantity
before placing an order.
YINGZHOU supports single-unit purchasing,
bulk orders and mixed-brand industrial
automation sourcing.
Available quantities and dispatch
arrangements are subject to confirmation.
IN STOCK
Siemens 5SY6206-7CV
Contact us for exact-model verification,
available quantities and bulk pricing.
Please confirm the 6A rating,
2-pole configuration, 400V AC voltage,
required breaking capacity and
installation specifications before ordering.
Request Bulk Pricing
