Fluke

Fluke 1AC-C2 II VoltAlert Non-Contact Voltage Tester 200-1000V AC CAT IV 1000V

Name: Fluke 1AC-C2 II VoltAlert Non-Contact Voltage Tester 200-1000V AC CAT IV 1000V
Brand: Fluke
SKU: Fluke 1AC-C2II
Price: 19.99 USD
Availability: InStock

Fluke 1AC-C2 II VoltAlert Non-Contact Voltage Tester 200-1000V AC CAT IV 1000V

$19.99 USD

In offerta Esaurito

Model Number Fluke 1AC-C2II

Varianti di prodotto

Quantità

YingZhou Industrial Automation | Product Information

Fluke 1AC-C2 II VoltAlert Non-Contact Voltage Tester

200–1000V AC | CAT IV 1000V | Audible & Visual Alert | Voltbeat Technology

✓ IN STOCK & AVAILABLE TO ORDER | Actual Product Photos | Exact Model Verified

Specification	Verified Product Data
Manufacturer	Fluke
Exact Model	1AC-C2 II
Product Series	1AC II VoltAlert
Product Type	Non-Contact AC Voltage Tester
Voltage Detection Range	200–1000 V AC
Operating Principle	AC Electrostatic Field Sensing
Frequency Range	45–405 Hz
Safety Rating	CAT IV 1000 V
Applicable Safety Standards	IEC 61010-1; IEC 61010-2-030
Ingress Protection	IP40
Visual Voltage Alert	Red LED at Detector Tip
Audible Voltage Alert	Beeper
Audible/Silent Mode	Supported
Self-Test Technology	Voltbeat Continuous Self-Test
Power Control	On/Off Button
Power Supply	2 × AAA Alkaline Batteries
Batteries Included	Yes, as Indicated on Packaging
Operating Temperature	-10°C to +50°C
Maximum Operating Altitude	3000 m
Detector Design	Portable Pen-Style Tester
Detection Type	Non-Contact AC Voltage
Availability	IN STOCK

Product Overview

The Fluke 1AC-C2 II VoltAlert is a portable non-contact AC voltage tester designed for electricians, industrial maintenance personnel and electrical service technicians. The actual product packaging identifies a 200–1000V AC detection range and a CAT IV 1000V safety rating. The detector senses an AC electrostatic field without requiring direct metallic contact with an energized conductor. When AC voltage is detected, its tip illuminates red and the audible alarm sounds if enabled. Built-in Voltbeat continuous self-test technology provides a visual operating indication. The tester also features an On/Off button, selectable audible/silent operation and battery-powered portability. For electrical safety, verify the tester on a known live source before and after use. A non-contact indication alone must not be used to establish an electrically safe, de-energized condition.

Key Product Features

Exact Fluke Model — 1AC-C2 II VoltAlert non-contact AC voltage tester.
200–1000V AC Detection — Voltage sensing range shown on the actual packaging.
CAT IV 1000V Safety Rating — Manufacturer-specified measurement category.
Non-Contact Voltage Detection — Detects AC electrostatic fields without metallic contact.
Audible and Visual Alerts — Red detector-tip indication and audible beeper.
Voltbeat Technology — Continuous battery and circuit self-test indication.
Audible/Silent Operation — Selectable audible indication for different environments.
Portable Battery-Powered Design — Uses two AAA alkaline batteries.

Actual Product Verification

✓ Actual product packaging photograph supplied.

✓ Brand shown on packaging: FLUKE.

✓ Model shown on packaging: 1AC-C2 II.

✓ Product family shown: VoltAlert with Sound.

✓ Voltage detection marking: 200–1000V AC.

✓ Safety category marking: CAT IV 1000V.

✓ Packaging identifies batteries included and On/Off operation.

✓ Manufacturer specifications checked against the Fluke 1AC II product family.

✓ Live-voltage functional testing has not been independently performed.

In Stock & Available to Order

The Fluke 1AC-C2 II VoltAlert non-contact voltage tester is marked IN STOCK based on seller-supplied availability information. Actual product packaging photography is available for pre-order identification. Please confirm the exact regional model and required quantity before placing an order. Electrical users should follow the manufacturer's operating instructions and approved voltage-testing procedures.

IN STOCK