• FESTO DFM-25-25-P-A-GF 170848 Double Acting Guided Drive 25mm Bore 25mm Stroke Plain Bearing-YingZhou Automatization
  • FESTO DFM-25-25-P-A-GF 170848 Double Acting Guided Drive 25mm Bore 25mm Stroke Plain Bearing-YingZhou Automatization
  • FESTO DFM-25-25-P-A-GF 170848 Double Acting Guided Drive 25mm Bore 25mm Stroke Plain Bearing-YingZhou Automatization
  • FESTO DFM-25-25-P-A-GF 170848 Double Acting Guided Drive 25mm Bore 25mm Stroke Plain Bearing-YingZhou Automatization
  • FESTO DFM-25-25-P-A-GF 170848 Double Acting Guided Drive 25mm Bore 25mm Stroke Plain Bearing-YingZhou Automatization
  • FESTO DFM-25-25-P-A-GF 170848 Double Acting Guided Drive 25mm Bore 25mm Stroke Plain Bearing-YingZhou Automatization
1 6

FESTO

FESTO DFM-25-25-P-A-GF 170848 Double Acting Guided Drive 25mm Bore 25mm Stroke Plain Bearing

FESTO DFM-25-25-P-A-GF 170848 Double Acting Guided Drive 25mm Bore 25mm Stroke Plain Bearing

$88.99 USD
$88.99 USD
In offerta Esaurito
Model Number
YingZhou Industrial Automation | Product Information

FESTO DFM-25-25-P-A-GF 170848 Guided Drive

Double-acting | 25mm Bore | 25mm Stroke | Plain-bearing Guide
✓ IN STOCK & AVAILABLE TO ORDER  |  Actual Packaging Photos  |  Exact Model Verified
Specification Verified Product Data
Manufacturer FESTO
Catalog Number DFM-25-25-P-A-GF
Part Number 170848
Product Family DFM
Product Type Pneumatic Guided Drive
Piston Diameter 25 mm
Stroke 25 mm
Operating Mode, Drive Unit Yoke
Mode of Operation Double-acting
Guide Type Plain-bearing Guide
Structural Design Guide
Cushioning Elastic Cushioning Rings / Pads at Both Ends
Position Detection Via Proximity Switch
Proximity Switch Included Not Confirmed
Operating Pressure 0.15-1 MPa / 1.5-10 bar
Maximum Speed 0.8 m/s
Mounting Position Any
Pneumatic Connection G1/8
Operating Medium Compressed Air per ISO 8573-1:2010 [7:4:4]
Lubricated Operation Possible; Continued Lubrication Required Thereafter
Ambient Temperature -20°C to +80°C
Corrosion Resistance Class CRC 1 - Low Corrosion Stress
LABS (PWIS) Conformity VDMA24364-B1/B2-L
Cleanroom Suitability Class 6 per ISO 14644-1, Measured According to ISO 14644-14
Impact Energy at End Positions 0.3 Nm
Load Centre-of-Gravity Distance xs 50 mm
Maximum Force Fy 810.7 N
Maximum Static Force Fy 810.7 N
Maximum Force Fz 810.7 N
Maximum Static Force Fz 810.7 N
Maximum Torque Mx 27.56 Nm
Maximum Static Moment Mx 27.56 Nm
Maximum Torque My 15.4 Nm
Maximum Static Moment My 15.4 Nm
Maximum Torque Mz 15.4 Nm
Maximum Static Moment Mz 15.4 Nm
Maximum Permissible Torque Load Mx at Specified Stroke 5.9 Nm
Maximum Payload at Defined xs 116 N
Theoretical Advance Force at 6 bar 295 N
Theoretical Return Force at 6 bar 247 N
Moving Mass 669 g
Product Weight 1308 g
Cover Material Wrought Aluminium Alloy
Housing Material Wrought Aluminium Alloy
Piston Rod Material High-alloy Stainless Steel
Seal Material NBR
Materials Compliance RoHS-compliant
Packaging Series 03-2025:58 - Actual Packaging Label
Country of Origin Made in China - Actual Packaging Label

Product Overview

The FESTO DFM-25-25-P-A-GF, manufacturer part number 170848, is a double-acting pneumatic guided drive from the FESTO DFM series. It features a 25 mm piston diameter, a 25 mm stroke and a plain-bearing guide with a yoke plate for guided linear movement. The manufacturer specifies an operating pressure range of 1.5 to 10 bar, a maximum speed of 0.8 m/s and a G1/8 pneumatic connection. Elastic cushioning rings or pads at both ends support end-position operation. Position sensing is available through compatible proximity switches, which are not confirmed as included. At 6 bar, the manufacturer specifies a 295 N theoretical advancing force and a 247 N theoretical retracting force. The manufacturer also lists a maximum payload of 116 N under its specified stroke and 50 mm load centre-of-gravity distance conditions. The specified ambient temperature range is -20°C to +80°C, with CRC 1 corrosion resistance classification. The cover and housing use wrought aluminium alloy, with high-alloy stainless steel piston rods and NBR seals. The specified product weight is 1308 g, with a moving mass of 669 g. Supplied actual photography shows the protected FESTO product and packaging label marked DFM-25-25-P-A-GF and material number 170848. Please confirm installation, load requirements, sensors and mounting accessories before ordering.

Key Product Features

  • FESTO DFM Guided Drive — Manufacturer model DFM-25-25-P-A-GF, part number 170848.
  • 25mm Bore and 25mm Stroke — Manufacturer-confirmed pneumatic guided drive dimensions.
  • Double-acting Pneumatic Operation — Pneumatic actuation for powered advancing and retracting movements.
  • Plain-bearing Guide — GF configuration with yoke-guided movement.
  • 1.5-10 Bar Operating Pressure — G1/8 pneumatic connection and maximum speed of 0.8m/s.
  • Elastic Cushioning at Both Ends — Elastic rings or pads specified for end-position cushioning.
  • 295N Theoretical Advance Force — Rated at 6 bar, with 247N theoretical return force.

Actual Product Verification

✓ Actual protective packaging photograph supplied
✓ FESTO manufacturer label visible
✓ Packaging catalog number: DFM-25-25-P-A-GF
✓ Packaging material number: 170848
✓ Packaging series marking: 03-2025:58
✓ Packaging description: Guided Drive
✓ Packaging origin marking: Made in China
✓ Guided drive visible through protective wrapping
✓ Complete catalog model and material number match the requested product
✓ Exposed product nameplate not independently inspected
✓ Functional testing and accessory completeness not confirmed

In Stock & Available to Order

FESTO DFM-25-25-P-A-GF 170848 is marked in stock based on the supplied inventory information. This double-acting pneumatic guided drive is offered for industrial automation procurement, pneumatic handling equipment maintenance and exact-model replacement requirements. The supplied photograph confirms the FESTO packaging label, complete model and manufacturer part number. Please verify the 25 mm piston diameter, 25 mm stroke, GF plain-bearing guide, G1/8 pneumatic connection, required load conditions and mounting arrangement before completing an order. Proximity sensors and separate mounting accessories are not confirmed as included.

IN STOCK

FESTO DFM-25-25-P-A-GF 170848

Contact us for exact-model verification, multiple units and project sourcing. Please confirm the double-acting configuration, 25mm bore, 25mm stroke, plain-bearing guide and installation requirements before ordering.

Request Bulk Pricing

Looking for other FESTO industrial automation products?

Explore FESTO Industrial Automation Products
Visualizza dettagli completi

PRODUCT CATEGORY