YingZhou Industrial Automation | Product Information
ABB FPNO-21 PROFINET IO Fieldbus Adapter
3AXD50000192779 | Dual RJ45 | 100 Mbps PROFINET IO | CC-B | ABB Drive Communication Module
| Specification |
Product Data |
| Brand |
ABB |
| Exact Model |
FPNO-21 |
| ABB Order Code |
3AXD50000192779 |
| Product Type |
PROFINET IO Fieldbus Adapter Module |
| Communication Protocol |
PROFINET IO |
| PROFINET Conformance |
Class B (CC-B) |
| Supported Communication Profiles |
PROFIdrive / ABB Drives |
| PROFINET Real-Time Communication |
RT Supported; IRT Not Supported |
| Ethernet Interface |
2 × RJ45 |
| Ethernet Port Identification |
X1 / X2 |
| Ethernet Link Speed |
10/100 Mbit/s |
| PROFINET IO Data Rate |
100 Mbit/s Full-Duplex |
| Ethernet Standards |
IEEE 802.3 / IEEE 802.3u |
| Network Topology |
Bus / Star / Ring |
| Integrated Ethernet Switch |
Yes |
| Media Redundancy Protocol |
MRP Supported |
| S2 Redundancy |
Supported — Configuration Dependent |
| OPC UA Functionality |
Supported — Firmware/Configuration Dependent |
| Supported Drive Platform |
ABB Common Architecture Drives |
| Listed ABB Drive Families |
ACS380 / ACS480 / ACS580 / ACH580 / ACQ580 / ACS880 / DCS880 / DCT880 |
| Installation Method |
Drive Control Unit Option Slot |
| Drive-Side Connector |
20-Pin Connector |
| Supply Voltage |
+3.3 V DC ±5% — From Drive |
| Maximum Supply Current |
400 mA |
| Status Indicators |
HOST / MODULE / NET |
| Maximum Ethernet Segment Length |
100 m — Specified Cabling Conditions |
| Degree of Protection |
IP20 |
| Ambient Conditions |
According to Applicable Drive Manual |
| Country of Manufacture |
China — Packaging Photo Verified |
Product Overview
The ABB FPNO-21, order code 3AXD50000192779, is a PROFINET IO fieldbus adapter module designed to connect supported ABB drives to industrial Ethernet control networks. It features two RJ45 Ethernet ports, PROFINET Conformance Class B, and 100 Mbit/s full-duplex PROFINET IO communication. The adapter supports PROFIdrive and ABB Drives communication profiles, an integrated Ethernet switch, and Media Redundancy Protocol (MRP). It is installed in a supported drive control unit option slot and powered by the drive. Drive model and firmware compatibility must be confirmed before ordering.
Key Product Features
-
PROFINET IO adapter for supported ABB drives
-
Dual RJ45 X1/X2 Ethernet connections
-
100 Mbps full-duplex PROFINET IO communication
-
Conformance Class B with PROFIdrive and ABB Drives profiles
-
Integrated Ethernet switch and MRP support
-
HOST, MODULE and NET diagnostic status indicators
-
Drive option-slot installation with power supplied by the drive
Actual Product Verification
✓ Actual product photos
✓ PROFINET IO module appearance shown
✓ ABB packaging label with FPNO-21 model visible
✓ Verify exact model FPNO-21 and order code 3AXD50000192779 before ordering
In Stock & Ready to Order
ABB FPNO-21, order code 3AXD50000192779, is currently in stock. Actual product and packaging photos are available for model verification. Please confirm the required PROFINET IO communication protocol, ABB drive model, control unit, firmware version and option-slot requirements before ordering.
IN STOCK
ABB FPNO-21 | 3AXD50000192779
Order online or contact us for project and quantity pricing.
Request Project Pricing
