YingZhou Industrial Automation | Product Information
Schneider Electric LC1DMKM7C TeSys Deca Capacitor Contactor
25kVAR at 400V | 27kVAR at 440V | 3P | 220V AC Coil
| Specification |
Product Data |
| Brand |
Schneider Electric |
| Exact Model |
LC1DMKM7C |
| Series |
TeSys Deca / TeSys D |
| Product Type |
Capacitor Duty Contactor |
| Application |
Power Factor Correction |
| Utilisation Category |
AC-6b |
| Number of Poles |
3P |
| Main Contact Composition |
3 Normally Open (3 NO) |
| Auxiliary Contacts |
1 NO + 2 NC |
| Control Coil Voltage |
220V AC, 50/60Hz |
| Capacitor Rating at 230V AC |
14kVAR at 50Hz, 60°C |
| Capacitor Rating at 400V AC |
25kVAR at 50Hz, 60°C |
| Capacitor Rating at 440V AC |
27kVAR at 50Hz, 60°C |
| Capacitor Rating at 690V AC |
42kVAR at 50Hz, 60°C |
| Rated Operational Voltage |
Up to 690V AC, 50/60Hz — Power Circuit |
| Inrush Current Limitation |
Pre-wired Damping Resistors |
| Contact Arrangement |
Front-Mounted Early-Make Poles |
| Mounting |
DIN Rail / Plate |
| Protection Rating |
IP20, Front Face |
| Operating Temperature |
−5°C to +60°C |
| Operating Rate |
Up to 240 Cycles/Hour |
| Applicable Standards |
IEC 60947-4-1 / IEC 60831 |
Product Overview
The Schneider Electric LC1DMKM7C is a
TeSys Deca capacitor duty contactor
designed for switching three-phase capacitor banks
in power factor correction systems.
This model provides a
220V AC 50/60Hz control coil,
3 normally open main contacts
and 1 NO + 2 NC auxiliary contacts.
It is rated for
25kVAR at 400V AC and
27kVAR at 440V AC
under the manufacturer-specified
operating conditions.
The AC-6b utilisation category
identifies its dedicated capacitor switching duty.
The TeSys LC1DMK design incorporates
front-mounted early-make poles
and pre-wired damping resistors
to help limit the capacitor switching inrush current.
The contactor supports
DIN rail or plate mounting
for integration into appropriate industrial
electrical control assemblies.
Actual product and Schneider Electric packaging
photographs are provided.
The exact model LC1DMKM7C
and 220V AC 50/60Hz coil details
are visible on the packaging label.
Confirm the capacitor bank rated voltage,
reactive power requirement,
control coil supply and exact model
before ordering.
Key Product Features
-
25kVAR Capacitor Switching
at 400V AC, 50Hz
-
27kVAR at 440V AC
under the manufacturer-specified rating conditions
-
220V AC Control Coil
for 50/60Hz control circuits
-
3-Pole Main Contacts
with 3 normally open power contacts
-
AC-6b Capacitor Switching Duty
for power factor correction systems
-
1 NO + 2 NC Auxiliary Contacts
for signalling and control
-
Pre-wired Damping Resistors
for capacitor switching inrush limitation
Actual Product Verification
✓
Actual product photos
✓
Product appearance and rating label visible
✓
Packaging shown with exact model LC1DMKM7C
✓
Verify exact model
LC1DMKM7C before ordering
In Stock & Ready to Order
Schneider Electric LC1DMKM7C
is currently in stock.
Actual capacitor contactor and packaging-label
photographs are provided for buyer verification.
Please confirm the
25kVAR at 400V AC or
27kVAR at 440V AC
rated capacitor switching requirement,
220V AC 50/60Hz coil supply,
and 3-pole configuration
before ordering.
Capacitor bank selection and circuit protection
should follow the applicable manufacturer documentation.
