Enerpac
Enerpac H9220 700 Bar 20 ft Heavy-Duty Hydraulic Hose 1/4 Inch ID 3/8 NPTF
Enerpac H9220 700 Bar 20 ft Heavy-Duty Hydraulic Hose 1/4 Inch ID 3/8 NPTF
Tidak dapat memuat ketersediaan pengambilan
Enerpac H9220 900 Series Hydraulic Hose
| Specification | Verified Product Data |
|---|---|
| Manufacturer | Enerpac |
| Catalog Number | H9220 |
| Product Family | 900 Series |
| Product Type | Heavy-Duty Rubber Hydraulic Hose |
| Maximum Working Pressure | 700 Bar / 10,000 PSI |
| Hose Length | 20 ft / 6.1 m |
| Internal Diameter | 0.25 Inch / 6.4 mm |
| Hose Material | Heavy-Duty Rubber |
| Hose Reinforcement | Two Layers of Steel Wire Braids |
| Outer Cover | Rubber |
| End One Connection | 3/8" NPTF |
| End Two Connection | 3/8" NPTF |
| Quick Coupler | Not Specified for Standard H9220; Confirm Actual Supply |
| Hose Oil Capacity | 11.78 in³ / Approx. 193 mL |
| Strain Relief | Crimped-On Rubber Strain Relief |
| Hose Flexibility | Flexible, Low-Memory Design |
| Reference Specification | Designed to Comply with MHI IJ-100 |
| Nominal Weight | 8.0 lb / Approx. 3.63 kg |
| Country of Manufacture | Made in India (Actual Packaging) |
| Actual Hose Marking | WP 700 BAR / 10,000 PSI / 900 SERIES |
| Packaging Model | H9220 |
| Packaging Barcode | 66200520352 |
Product Overview
The Enerpac H9220 is a 900 Series heavy-duty rubber high-pressure hydraulic hose designed for high-pressure hydraulic connections in suitable industrial tooling systems. The hose is rated for a maximum working pressure of 700 bar / 10,000 psi and has a length of 20 feet / approximately 6.1 meters. It features a 0.25-inch / 6.4 mm internal diameter and manufacturer-specified 3/8-inch NPTF connections at both ends. The 900 Series construction uses a rubber hose reinforced with two layers of steel wire braids, while crimped-on rubber strain relief is designed to improve durability at the hose ends. Its flexible, low-memory rubber construction is particularly useful for longer hydraulic hose runs. The H9220 has an internal oil capacity of 11.78 cubic inches, approximately 193 mL, and a nominal weight of 8.0 lb / approximately 3.63 kg. The hose is designed to comply with the Material Handling Institute IJ-100 hose specification. Actual product photographs show an Enerpac-branded hose marked WP 700 BAR / 10,000 PSI, 900 SERIES, together with original packaging identified as H9220. Before ordering, verify the pump and cylinder connection sizes, working pressure, hose length, hydraulic oil requirements and any needed quick couplers. The carton has a handwritten reference to CH604, but the inclusion and installation of that coupler must be confirmed separately.
Key Product Features
- 10,000 PSI Maximum Working Pressure — Hydraulic hose rated for high-pressure operation up to 700 bar.
- 20-Foot Hose Length — Approximately 6.1 meters for extended hydraulic connections.
- 1/4-Inch Internal Diameter — 0.25-inch / 6.4 mm inner bore for hydraulic oil flow.
- 3/8-Inch NPTF Threaded Connections — Manufacturer-specified hose end fittings on both ends.
- 900 Series Heavy-Duty Rubber — Robust construction for demanding industrial hydraulic environments.
- Double Steel Wire Braid — Reinforced hose construction for high-pressure hydraulic service.
- Crimped-On Rubber Strain Relief — Helps improve hose life and fitting-end durability.
- Flexible, Low-Memory Design — Suitable for longer hose routing where flexibility is needed.
- 11.78 in³ Internal Oil Capacity — Approximately 193 mL oil volume for a 20 ft hose.
- Enerpac H9220 Exact Model — Manufacturer model and actual packaging identified.
Actual Product Verification
In Stock & Available to Order
Enerpac H9220 is marked in stock based on YINGZHOU inventory information. Actual Enerpac hydraulic hose and packaging photographs are available for exact-model verification. This 900 Series heavy-duty rubber hydraulic hose is rated for 700 bar / 10,000 psi and features a 20-foot length, 1/4-inch internal diameter, and 3/8-inch NPTF connections at both ends. Its reinforced rubber construction is designed for high-pressure hydraulic connections between suitably rated tools and components. For hydraulic maintenance, pump-to-cylinder connections, industrial tool replacement or multiple-unit procurement, please confirm the exact hose model, pressure requirements, end fitting compatibility, any additional couplers, quantity and dispatch arrangements before ordering.
Enerpac H9220
Contact us for exact-model verification, multiple units and project sourcing. Please confirm the 700 bar working pressure, 20 ft hose length, 1/4-inch internal diameter, 3/8-inch NPTF connections and required quick couplers before ordering.
Request Bulk PricingLooking for other Enerpac industrial hydraulic tools?
Explore Enerpac Industrial Hydraulic ToolsShare
