YingZhou Industrial Automation | Product Information
Delta EMM-PG01L MH300 Series Encoder Feedback PG Card
ABZ Encoder | Line Driver Output | 300kHz | 5V / 12V | MH300
| Specification |
Product Data |
| Brand |
Delta Electronics |
| Exact Model |
EMM-PG01L |
| Product Family |
MH300 Series AC Drive Accessories |
| Product Type |
Encoder Feedback PG Option Card |
| Compatible Drive Series |
Delta MH300 |
| Encoder Feedback Format |
ABZ Incremental Encoder |
| PG Output Type |
Line Driver / Differential Output |
| Encoder Feedback Input Group |
PG1 |
| Additional Pulse Input Group |
PG2 |
| PG Signal Output Group |
PG OUT |
| PG1 Encoder Input Channels |
A1 / A1-, B1 / B1-, Z1 / Z1- |
| PG1 Input Type |
Line Driver or Open Collector, According to Configuration |
| PG1 Signal Phases |
1-Phase / 2-Phase |
| PG1 Maximum Input Frequency |
300kHz |
| PG2 Pulse Input Channels |
A2 / A2-, B2 / B2- |
| PG2 Input Type |
Line Driver or Open Collector |
| PG2 Signal Phases |
1-Phase / 2-Phase |
| PG2 Maximum Input Frequency |
300kHz |
| Open-Collector Input Reference |
5-24V, Subject to Wiring and Pull-Up Requirements |
| Encoder Supply Terminal |
VP |
| Selectable Encoder Supply |
+5V / +12V ±5% |
| Encoder Supply Selection |
Onboard Voltage Selection Switch |
| Maximum Encoder Supply Current |
200mA |
| Encoder Power / Signal Common |
DCM |
| PG OUT Signal Channels |
AO / AO-, BO / BO-, ZO / ZO- |
| PG OUT Signal Format |
Line Driver |
| PG OUT Frequency Division |
1-255 |
| PG OUT Maximum Voltage |
5VDC |
| PG OUT Maximum Current |
15mA (2024 Delta Catalogue) |
| PG OUT Maximum Frequency |
300kHz |
| PG Output Signal Ground |
SG |
| Protective Earth Terminal |
PE |
| Drive Parameter Reference |
Pr.10-00 to Pr.10-02 |
| Additional Parameter Reference |
Pr.10-16 to Pr.10-18 in Applicable MH300 Manuals |
| Internal Drive Connection |
MH300 Option Card Connection Interface |
| External Wiring Interface |
Terminal Blocks |
| Installation |
Compatible MH300 Drive Option Card Position |
| Standalone Controller |
No - AC Motor Drive Accessory |
Product Overview
The Delta EMM-PG01L is an
ABZ encoder feedback PG option card
designed for compatible
Delta MH300 Series AC motor drives.
The card provides an encoder feedback input
group (PG1), an additional pulse input group (PG2)
and differential line-driver PG signal outputs.
It supports single-phase or two-phase encoder
and pulse input configurations with a
maximum signal frequency of 300kHz.
A selectable +5V / +12V encoder power output
is available with a maximum supply current of
200mA.
The PG OUT interface supports
1-255 frequency division,
a maximum line-driver output voltage of
5VDC and a maximum output
frequency of 300kHz.
The EMM-PG01L is a PG feedback accessory for
MH300 AC motor drives, not an ASDA servo drive
expansion card.
Key Product Features
-
MH300 Series encoder feedback accessory
for compatible Delta AC motor drives
-
ABZ incremental encoder feedback
with differential line-driver PG signal outputs
-
PG1 encoder input and PG2 pulse input
for supported feedback and pulse applications
-
Up to 300kHz signal frequency
on the specified encoder, pulse and PG output interfaces
-
Selectable +5V / +12V encoder supply
with a maximum current of 200mA
-
1-255 PG output frequency division
for supported line-driver signal applications
-
Internal drive connector and external terminal blocks
for installation in a compatible MH300 drive
Actual Product Verification
✓
Actual product photos
✓
Product model label visible:
EMM-PG01L
✓
Delta packaging shown with matching
EMM-PG01L model label
✓
Circuit board, terminal blocks and
internal drive connection interface shown
✓
Actual product appearance and
PCB components shown for buyer verification
✓
Verify the exact model, MH300 drive compatibility,
encoder signal type and wiring configuration
before ordering
In Stock & Ready to Order
Delta EMM-PG01L is currently in stock.
Actual product and packaging photos are available
for buyer reference.
Please confirm the exact model,
Delta MH300 drive compatibility,
required ABZ encoder feedback,
line-driver output configuration,
encoder supply voltage, PG signal frequency
and connection requirements before ordering.
