Delta
Delta CMC-PN01 PROFINET IO Communication Card Dual RJ45 10/100Mbps for VFD
Delta CMC-PN01 PROFINET IO Communication Card Dual RJ45 10/100Mbps for VFD
Tidak dapat memuat ketersediaan pengambilan
Delta CMC-PN01 PROFINET Communication Card
| Specification | Verified Product Data |
|---|---|
| Manufacturer | Delta Electronics |
| Catalog Number | CMC-PN01 |
| Product Family | CMC Communication Option Cards |
| Product Type | PROFINET Communication Card |
| Primary Application | Industrial AC Motor Drive Communication |
| Network Protocol | PROFINET IO |
| PROFINET Device Role | IO Device |
| Network Interface | 2 x RJ45 |
| Number of Ports | 2 |
| Transmission Speed | 10/100 Mbps Auto-Negotiation |
| Physical Ethernet Standard | IEEE 802.3 |
| Recommended Network Cable | Shielded Category 5e |
| Specified Cable Distance | Up to 100 m Per Connection |
| Network Data Exchange | PROFINET Process Data Exchange |
| Drive Control | Network-Based Drive Operation Commands |
| Drive Parameter Access | Supported Parameter Read and Write Functions |
| Drive Status Monitoring | Supported Through PROFINET |
| Engineering Device Description | GSDML File |
| Drive Interface | Internal Communication Card Connector |
| Status Indicators | Ready, MT, SD, BF, ACT and LINK Indicators |
| MAC Address Identification | MAC1 / MAC2 / MAC3 |
| Network Arrangement | Line / Daisy-Chain Connection as Documented |
| Operating Voltage | 5 V DC |
| Power Consumption | 0.8 W |
| Electrical Insulation Rating | 500 V DC |
| Operating Temperature | -10°C to +50°C |
| Operating Humidity | Up to 90% RH |
| Storage Temperature | -25°C to +70°C |
| Storage Humidity | Up to 95% RH |
| Net Weight | Approximately 27 g |
| Manufacturer-Documented Drive Families | C2000 / VP3000; Other Families Subject to Drive-Specific Verification |
| C2000 Firmware Requirement | Version 2.04 or Later, Per Manual |
| Card Version (Actual Photo) | V1.05 |
| Packaging Version (Actual Photo) | 01.05 |
| Country of Manufacture | Made in China (Packaging) |
Product Overview
The Delta CMC-PN01 is an industrial PROFINET communication option card designed to connect compatible Delta AC motor drives to PROFINET automation networks. The card operates as a PROFINET IO Device, allowing a compatible network controller to exchange operational data with the connected variable frequency drive. Its communication functions include drive control, drive status monitoring and parameter access under the manufacturer's supported network configuration. The CMC-PN01 provides two RJ45 network ports with 10/100 Mbps auto-negotiation and supports PROFINET communication over shielded Category 5e cabling. Delta provides a GSDML device description file for integration with supported PROFINET engineering environments. The communication card is rated for 5 V DC operating power with 0.8 W power consumption and is installed through an internal communication-card connection in compatible drives. Delta documentation covers installation with C2000 and VP3000 drive families, while other drive families and versions require their respective compatibility documentation. The actual supplied product and packaging photographs both identify the exact model CMC-PN01 and show corresponding version 1.05 markings. Before ordering, verify the host drive model, firmware compatibility, card installation requirements, PROFINET controller configuration and required network accessories.
Key Product Features
- PROFINET Communication Card — Delta CMC-PN01 option module for compatible industrial motor drives.
- PROFINET IO Device — Integrates a supported drive with a PROFINET controller.
- Dual RJ45 Network Ports — Two Ethernet connectors for supported industrial network configurations.
- 10/100 Mbps Communication — Auto-negotiated data rate using IEEE 802.3 physical networking.
- Drive Control Over PROFINET — Supports network-based drive operation commands.
- Parameter Access and Monitoring — Allows supported parameter exchange and drive-status monitoring.
- GSDML Configuration Support — Manufacturer device description for PROFINET engineering tools.
- 5 V DC Operating Power — Rated communication-card power consumption of 0.8 W.
- Industrial Operating Temperature — Specified for -10°C to +50°C operation.
- Compatible Drive Expansion — Designed for documented Delta drive platforms, subject to exact-model and firmware confirmation.
Actual Product Verification
In Stock & Available to Order
Delta CMC-PN01 is marked in stock based on YINGZHOU inventory information. Actual communication-card and packaging photographs are available for exact-model verification. This PROFINET IO communication card provides dual RJ45 ports, 10/100 Mbps network connectivity, supported drive-control and monitoring functions, and GSDML integration support. The module is rated for 5 V DC operating power and is designed for compatible Delta AC motor drive platforms. For drive maintenance, industrial network upgrades, replacement communication cards, automation system integration or multiple-unit procurement, please confirm the host drive model, firmware version, PROFINET controller, network configuration, quantity and dispatch arrangements before ordering.
Delta CMC-PN01
Contact us for exact-model verification, multiple units and project sourcing. Please confirm the required PROFINET communication function, compatible Delta drive, drive firmware version and network configuration before ordering.
Request Bulk PricingLooking for other Delta industrial automation products?
Explore Delta Industrial Automation ProductsShare
