Passer aux informations produits
1 de 7

Danfoss

Danfoss 060G1866 MBS 3250 Pressure Transmitter 0-60 Bar 4-20mA

Danfoss 060G1866 MBS 3250 Pressure Transmitter 0-60 Bar 4-20mA

Prix habituel $334.99 USD
Prix habituel Prix promotionnel $334.99 USD
En vente Épuisé
Model Number
YingZhou Industrial Automation | Product Information

Danfoss 060G1866 MBS 3250 Pressure Transmitter

MBS 3250 | 0–60 Bar | 4–20mA | G 1/4 | Pulse Snubber
✓ IN STOCK & AVAILABLE TO ORDER  |  Actual Product Photos  |  Exact Model Identification
Specification Product Data
Manufacturer Danfoss
Brand Danfoss
Product Series MBS 3250
Exact Code Number 060G1866
Product Type Industrial Pressure Transmitter
Measuring Principle Electronic Pressure Measurement
Pressure Measuring Range 0–60 bar
Pressure Reference Gauge / Relative
Output Signal 4–20 mA
Output Configuration 2-Wire Current Loop
Supply Voltage 9–32V DC
Typical Accuracy ±0.5% FS
Maximum Accuracy Error ±1.0% FS
Non-Linearity BFSL ≤ ±0.2% FS
Hysteresis and Repeatability ≤ ±0.1% FS
Response Time — Liquids Less than 4 ms (viscosity below 100 cSt)
Response Time — Air/Gases Less than 35 ms
Integrated Pulse Snubber Yes
Electrical Connection EN 175301-803-A, Pg 9
Pressure Connection G 1/4 DIN 3852-E
Pressure Connection Type Male Thread
Protection Rating IP65 with Mating Connector
Sensor Operating Temperature −40 to +100°C
Media Temperature Range −40 to +125°C
Ambient Temperature Range −40 to +100°C
Compensated Temperature Range 0 to +100°C
Storage Temperature −50 to +125°C
Wetted Parts Material Stainless Steel AISI 316L
Enclosure Material Stainless Steel AISI 316L
Electrical Polarity Protection Yes
Short-Circuit Protection Yes
Typical Applications Hydraulic Systems, Pumps, Industrial Machinery
Product Availability IN STOCK

Product Overview

The Danfoss 060G1866 is a MBS 3250 industrial pressure transmitter designed for reliable pressure measurement in hydraulic systems and demanding industrial applications. This exact model belongs to the Danfoss MBS 3250 series, a family of compact heavy-duty pressure transmitters engineered for applications where vibration, pressure pulsation, cavitation and transient pressure peaks can affect measurement performance. The 060G1866 provides a manufacturer-specified measuring range of 0–60 bar using a gauge or relative pressure reference. It converts the measured pressure into a standard 4–20 mA analog current signal suitable for compatible industrial PLC analog input modules, process controllers and monitoring equipment. The transmitter uses a two-wire current-loop configuration and operates from a 9–32V DC power supply. The MBS 3250 design incorporates an integrated pulse snubber, which helps reduce the influence of cavitation, liquid hammer and sudden pressure peaks in hydraulic applications. This feature is particularly relevant to industrial systems involving pumps, hydraulic power units, actuators and equipment exposed to changing fluid pressure conditions. The transmitter offers a typical measurement accuracy of ±0.5% of full scale, with a manufacturer-specified maximum accuracy error of ±1.0% of full scale. The electronic measuring system is designed for stable industrial pressure monitoring and provides a response time of less than 4 milliseconds for liquids with viscosity below 100 cSt. For air and gas applications, the specified response time is less than 35 milliseconds. The 060G1866 uses a G 1/4 male pressure connection conforming to DIN 3852-E and an EN 175301-803-A Pg 9 angular electrical connection. These connection specifications should be checked carefully when replacing an existing pressure transmitter or designing a new industrial installation. The transmitter features stainless steel AISI 316L wetted components and enclosure construction, supporting durability in appropriately selected industrial media and environments. The specified media temperature range is −40 to +125°C, while the sensor operating and ambient temperature range for this 4–20 mA configuration is −40 to +100°C. The electrical connector arrangement provides an IP65 protection rating when the appropriate mating connector is properly installed. The MBS 3250 series is designed for demanding industrial and hydraulic applications requiring compact construction, vibration stability and reliable analog pressure measurement. Typical applications include hydraulic machinery, pump systems, industrial equipment, pressure monitoring circuits and maintenance replacement requirements. The actual product and its Danfoss packaging have been photographed, and both visible labels identify the model as MBS 3250, code number 060G1866. The photographed labels also confirm the 0–60 bar pressure range and 4–20 mA output signal. Before purchasing, buyers should verify the exact Danfoss code number, pressure range, output signal, power supply requirements, G 1/4 process connection, Pg 9 electrical connection and compatibility with the intended pressure medium. The transmitter is a continuous analog pressure measurement device and should not be confused with a mechanical or electronic pressure switch. Installation, electrical wiring, sealing and media compatibility should follow the official Danfoss technical documentation.

Key Product Features

  • Danfoss MBS 3250 Series — Heavy-duty industrial pressure transmitter designed for hydraulic and industrial pressure monitoring applications.
  • Exact Code Number 060G1866 — Manufacturer-specified pressure transmitter with a 0–60 bar measuring range.
  • 4–20mA Analog Output — Standard industrial current-loop signal for compatible PLCs, controllers and monitoring systems.
  • 9–32V DC Supply — Supports industrial DC power supply applications within the specified voltage range.
  • Integrated Pulse Snubber — Helps reduce the influence of cavitation, liquid hammer and pressure peaks.
  • G 1/4 Pressure Connection — DIN 3852-E threaded connection for compatible hydraulic installations.
  • Pg 9 Electrical Connector — EN 175301-803-A angular electrical connection.
  • Typical ±0.5% FS Accuracy — Supports reliable industrial pressure measurement.
  • Stainless Steel Construction — AISI 316L enclosure and wetted components for demanding industrial environments.
  • High Media Temperature Capability — Suitable for specified media temperatures from −40 to +125°C.
  • IP65 Enclosure Protection — Protection rating applies with the appropriate mating electrical connector installed.
  • Actual Product Photography — Physical pressure transmitter and matching Danfoss packaging photographed for model identification.

Actual Product Verification

✓ Actual Danfoss pressure transmitter photographed
✓ Actual product packaging photographed
✓ Danfoss identification visible on packaging
✓ Exact code number: 060G1866
✓ MBS 3250 series marking visible on product and packaging
✓ Matching code number shown on packaging label
✓ 0–60 bar pressure measuring range confirmed
✓ 4–20 mA output signal confirmed
✓ 9–32V DC supply specification verified against manufacturer documentation
✓ G 1/4 DIN 3852-E pressure connection verified
✓ EN 175301-803-A Pg 9 electrical connection verified
✓ Integrated pulse snubber confirmed from manufacturer documentation
✓ Typical ±0.5% FS accuracy verified
✓ IP65 protection rating verified for the specified connector arrangement
✓ Official Danfoss technical specifications cross-referenced
Note: Photographs confirm visible product and packaging markings. Transmitter performance, internal condition and manufacturer authenticity have not been independently tested or certified.

In Stock & Available to Order

Danfoss 060G1866 MBS 3250 is marked in stock based on the supplied inventory information. Actual photographs of the pressure transmitter and its matching Danfoss packaging are available for model identification. This industrial pressure transmitter features a 0–60 bar measuring range, 4–20 mA analog output, 9–32V DC supply, integrated pulse snubber, G 1/4 DIN 3852-E pressure connection and EN 175301-803-A Pg 9 electrical connector. It is designed for compatible industrial hydraulic systems, pressure monitoring applications, pump equipment and maintenance replacement requirements. Please confirm the required quantity, pressure range, output signal, process connection, electrical connection and delivery destination before purchasing. Additional accessories and installation materials are not confirmed as included.

IN STOCK

Danfoss 060G1866 MBS 3250

Contact us for exact-model confirmation, industrial automation sourcing and bulk pricing. Please confirm the required quantity, pressure range, electrical configuration and delivery destination before ordering.

Request Bulk Pricing

Looking for other Danfoss pressure transmitters and industrial automation components?

Explore Danfoss Industrial Automation Products
Afficher tous les détails