YingZhou Industrial Automation | Product Information
Omron R88D-1SN15H-ECT 1S EtherCAT AC Servo Drive
1.5kW | 200-240V AC | 9.7A | EtherCAT | Ver. 1.4
| Specification |
Verified Product Data |
| Manufacturer |
OMRON Corporation |
| Catalog Number |
R88D-1SN15H-ECT |
| Product Family |
1S Series |
| Product Type |
AC Servo Drive |
| Drive Configuration |
EtherCAT Communication Type |
| Applicable Motor Capacity |
1.5kW / 1500W |
| Voltage Class |
200V AC Class |
| Main Circuit Input Voltage |
200-240V AC |
| Allowable Input Voltage Range |
170-252V AC |
| Main Circuit Input Phase |
Single-Phase / Three-Phase |
| Input Frequency |
50/60Hz |
| Allowable Input Frequency |
47.5-63Hz |
| Rated Input Current - Single-Phase |
15.7A RMS |
| Rated Input Current - Three-Phase |
9.0A RMS |
| Motor Output Voltage |
0-240V AC |
| Motor Output Phase |
Three-Phase |
| Rated Output Current |
9.7A RMS |
| Maximum Output Current |
28.4A RMS |
| Nameplate Output Frequency Range |
0-500Hz |
| Control Circuit Power Supply |
24V DC |
| Allowable Control Supply Range |
21.6-26.4V DC |
| Nameplate Control Power Rating |
24V DC / 1.2A |
| Control Circuit Current Consumption |
900mA (Manufacturer Specifications) |
| Communication Interface |
EtherCAT |
| EtherCAT Physical Layer |
100BASE-TX |
| EtherCAT Connectors |
2 x Shielded RJ45 Connectors |
| EtherCAT Ports |
ECAT IN / ECAT OUT |
| EtherCAT Drive Profile |
CiA 402 |
| PDO Mapping |
Fixed / Variable Mapping |
| Mailbox Communication |
CoE |
| EtherCAT Synchronization |
Distributed Clocks / Free Run |
| EtherCAT Communication Cycles |
125us, 250us, 500us, 750us, 1-10ms in 0.25ms Steps |
| Recommended EtherCAT Cable |
Shielded Category 5 or Higher |
| Maximum Communication Distance |
100m Between EtherCAT Nodes |
| Position Control Modes |
Cyclic Synchronous Position / Profile Position |
| Velocity Control Modes |
Cyclic Synchronous Velocity / Profile Velocity |
| Torque Control Mode |
Cyclic Synchronous Torque |
| Homing Function |
Supported |
| Safety Function |
STO, Subject to Applicable Safety System Configuration |
| Engineering Software |
Sysmac Studio |
| Minimum Software for Unit Ver. 1.4 |
Sysmac Studio Ver. 1.43 |
| Compatible Motor Example |
R88M-1L1K530T Series (Verify Full Motor Configuration) |
| Additional Motor Example |
R88M-1M1K520T Series (Verify Full Motor Configuration) |
| Main Circuit Heat Value |
85.5W (Specified Motor Conditions) |
| Control Circuit Heat Value |
20.4W |
| Degree of Protection |
IP20 |
| Installation Environment |
Appropriate Industrial Control Enclosure |
| Recommended Panel Protection |
IP54 Enclosure |
| Operating Ambient Temperature |
0°C to +55°C |
| Storage Temperature |
-20°C to +65°C |
| Relative Humidity |
90% RH Maximum, Non-Condensing |
| Maximum Operating Altitude |
1000m |
| Vibration Resistance |
5.88m/s² at 10-60Hz |
| Insulation Resistance |
0.5M Ohm Minimum at 500V DC |
| Unit Weight |
3.4kg |
| Product Version |
Ver. 1.4 (Actual Nameplate) |
| Product Lot Number |
27326M0109 (Actual Nameplate) |
| Packaging Lot Number |
27326M |
| Country of Manufacture |
Made in China (Actual Product and Packaging Labels) |
Product Overview
The Omron R88D-1SN15H-ECT is a 1S Series EtherCAT AC servo drive designed for precise industrial motion control applications. It supports compatible servo motors with a rated capacity of 1.5kW (1500W) and accepts a single-phase or three-phase 200-240V AC main circuit power supply. The main circuit rated input current is 15.7A for single-phase operation and 9.0A for three-phase operation, under the manufacturer's specified conditions. The servo drive provides a 9.7A RMS rated output current and a 28.4A RMS maximum output current. A separate 24V DC control power supply is required for the control circuit. The built-in EtherCAT communication interface supports the CiA 402 drive profile, cyclic synchronous motion control and communication with compatible automation controllers. The 1S Series provides positioning, velocity, torque and homing functions for industrial machine automation systems. The unit features an IP20 enclosure intended for installation inside a suitable industrial control panel. The manufacturer lists the drive weight as 3.4kg. The supplied actual photographs show an Omron R88D-1SN15H-ECT Ver. 1.4 servo drive and matching packaging, with consistent lot-number prefixes and Made in China markings. Please confirm the servo motor model, encoder and power cables, EtherCAT system compatibility and installation requirements before placing an order.
Key Product Features
-
Omron 1S Series EtherCAT Servo Drive — Industrial AC servo amplifier designed for compatible precision motion control systems.
-
1.5kW Motor Capacity — Supports compatible 1500W Omron 1S Series servo motors.
-
200-240V AC Input — Supports single-phase or three-phase main circuit supply arrangements.
-
9.7A Rated Output Current — Delivers a rated output current of 9.7A RMS and a maximum output current of 28.4A RMS.
-
Integrated EtherCAT Communication — Built-in 100BASE-TX EtherCAT interface with CiA 402 motion control support.
-
Separate 24V DC Control Power — Uses a dedicated 24V DC supply for the control circuit.
-
IP20 Industrial Construction — Designed for integration into an appropriate control cabinet with compatible servo system hardware.
Actual Product Verification
✓ Actual servo drive nameplate and packaging label photographs supplied
✓ Manufacturer identification: OMRON Corporation
✓ Drive catalog number: R88D-1SN15H-ECT
✓ Packaging catalog number: R88D-1SN15H-ECT
✓ Product version: Ver. 1.4 on device and packaging
✓ Product nameplate input: 200-240V AC, 1ph/3ph
✓ Product nameplate input current: 15.7A / 9.0A
✓ Product nameplate output current: 9.7A
✓ Product nameplate power rating: 1.5kW
✓ Product nameplate control power: 24V DC / 1.2A
✓ Product protection marking: IP20
✓ Actual drive lot number: 27326M0109
✓ Packaging lot number: 27326M
✓ Unit and packaging lot-number prefixes are consistent
✓ Product and packaging identify Made in China
✓ Confirm compatible servo motor, communication cables and installation accessories before dispatch
In Stock & Available to Order
Omron R88D-1SN15H-ECT is marked in stock based on the supplied inventory information. This 1S Series 1.5kW EtherCAT AC servo drive is available for industrial motion control maintenance, servo system replacement, machinery repair and project sourcing inquiries. The actual product and packaging photographs confirm the exact catalog number, Ver. 1.4 and consistent manufacturer lot-number markings. The servo drive is designed for compatible 1S Series motors and requires appropriate main power, 24V DC control power and EtherCAT control system connections. Please confirm the full servo motor model, electrical ratings, compatible cables, required accessories, order quantity and dispatch arrangements before completing an order.
IN STOCK
Omron R88D-1SN15H-ECT
Contact us for exact-model verification, multiple units and project sourcing. Please confirm the 1.5kW motor capacity, 200-240V AC main input, 9.7A rated output, 24V DC control supply, EtherCAT interface and servo system compatibility before ordering.
Request Bulk Pricing
