• Allen-Bradley 1734-OE2C POINT I/O 2-Channel Analog Output Module-YingZhou Automatization
  • Allen-Bradley 1734-OE2C POINT I/O 2-Channel Analog Output Module-YingZhou Automatization
  • Allen-Bradley 1734-OE2C POINT I/O 2-Channel Analog Output Module-YingZhou Automatization
  • Allen-Bradley 1734-OE2C POINT I/O 2-Channel Analog Output Module-YingZhou Automatization
  • Allen-Bradley 1734-OE2C POINT I/O 2-Channel Analog Output Module-YingZhou Automatization
  • Allen-Bradley 1734-OE2C POINT I/O 2-Channel Analog Output Module-YingZhou Automatization
  • Allen-Bradley 1734-OE2C POINT I/O 2-Channel Analog Output Module-YingZhou Automatization
  • Allen-Bradley 1734-OE2C POINT I/O 2-Channel Analog Output Module-YingZhou Automatization
1 8

Allen-Bradley

Allen-Bradley 1734-OE2C POINT I/O 2-Channel Analog Output Module

Allen-Bradley 1734-OE2C POINT I/O 2-Channel Analog Output Module

$142.99 USD
$142.99 USD
Oferta Agotado
Model Number
YingZhou Industrial Automation | Product Information

Allen-Bradley 1734-OE2C POINT I/O Analog Output Module

2 Channels | 4-20mA / 0-20mA | 13-Bit | 24V DC | Series C
✓ IN STOCK & AVAILABLE TO ORDER  |  Actual Product Photos  |  Exact Model Verified
Specification Verified Product Data
Manufacturer Allen-Bradley / Rockwell Automation
Catalog Number 1734-OE2C
Product Family POINT I/O
Product Type Analog Current Output Module
Number of Output Channels 2
Channel Configuration Single-Ended, Non-Isolated
Output Signal Type Analog Current
Configurable Output Range 4-20mA / 0-20mA
Output Resolution 13 Bits over 0-21mA
Typical Resolution per Count Approximately 2.5 Microamps per Count
Absolute Accuracy 0.1% Full Scale at 25°C
Accuracy Temperature Drift 30ppm/°C
Step Response to 63% Full Scale 24 Microseconds
Digital-to-Analog Conversion Rate 16 Microseconds
Maximum Resistive Output Load 750 Ohms
Output Before Communication 0mA Until Communication Is Established
Data Format Signed Integer
Calibration Factory Calibrated
Nominal Field Supply Voltage 24V DC
Field Supply Voltage Range 10-28.8V DC
Field Supply Current 70mA at 24V DC
POINTBus Voltage 5V DC
POINTBus Current 75mA (Manufacturer Selection Guide)
Maximum Power Dissipation 1.83W at 0 Ohm Output Loads
Isolation Voltage 50V Continuous Withstand Rating
Output Channel Isolation No Isolation Between Individual Channels
Compatible Terminal Bases 1734-TB, 1734-TBS, 1734-TB3, 1734-TB3S, 1734-TOP, 1734-TOPS
Keyswitch Position 4
Mounting Arrangement POINT I/O Base Assembly on DIN Rail
Enclosure Type Open-Style
Operating Temperature -20°C to +55°C (Manufacturer Selection Guide)
Storage Temperature -40°C to +85°C
Relative Humidity 5-95%, Non-Condensing
Vibration Rating 5g at 10-500Hz
Operating Shock 30g
Non-Operating Shock 50g
Module Weight 36g
Product Series Series C (Actual Product Label)
Firmware Revision 3.006 (Actual Product Label)
Product Serial Number 335928 (Actual Product and Packaging Labels)
Country of Origin Singapore
Manufacturer Lifecycle Active

Product Overview

The Allen-Bradley 1734-OE2C is a POINT I/O two-channel analog current output module manufactured by Rockwell Automation. It is designed to provide configurable industrial analog current signals within compatible POINT I/O distributed automation systems. The module features two single-ended, non-isolated analog output channels supporting 4-20mA and 0-20mA signal ranges. Its 13-bit output resolution provides approximately 2.5 microamps per count, with an absolute accuracy of 0.1% full scale at 25°C under the manufacturer's specified conditions. The module uses a 24V DC nominal field power supply, with an allowable range of 10-28.8V DC, and receives system-side power through the 5V DC POINTBus backplane. The current output channels support resistive loads up to 750 ohms. The 1734-OE2C is designed for mounting on compatible POINT I/O terminal bases within an appropriate DIN rail assembly. The supplied actual photographs show an Allen-Bradley 1734-OE2C Series C module with firmware revision 3.006 and serial number 335928. The original packaging label identifies the same model, series and serial number, with Singapore as the country of origin. This product is an analog output module, not an analog input module, and requires compatible POINT I/O system hardware for operation.

Key Product Features

  • Allen-Bradley POINT I/O Module — Two-channel analog current output module for distributed industrial automation systems.
  • Two Analog Current Outputs — Provides two single-ended, non-isolated output channels for compatible analog control devices.
  • 4-20mA / 0-20mA Output Ranges — Configurable standard industrial current signals for process control applications.
  • 13-Bit Output Resolution — Approximately 2.5 microamps per count across the specified conversion range.
  • 24V DC Field Supply — Designed for a nominal 24V DC field power connection and 5V DC POINTBus backplane power.
  • 750 Ohm Maximum Output Load — Supports compatible resistive current output loads within manufacturer limits.
  • POINT I/O System Integration — Designed for installation with compatible terminal bases and Rockwell Automation POINT I/O adapters.

Actual Product Verification

✓ Actual module and manufacturer packaging photographs supplied
✓ Manufacturer identification: Allen-Bradley / Rockwell Automation
✓ Packaging catalog number: 1734-OE2C
✓ Module catalog number: 1734-OE2C
✓ Product series: Series C on both labels
✓ Module firmware revision: 3.006
✓ Packaging serial number: 335928
✓ Module serial number: 335928
✓ Module output marking: 4-20mA or 0-20mA
✓ Module supply marking: 24V DC, 70mA
✓ Product and packaging identify Singapore as the country of origin
✓ Packaging and module identification match the official 1734-OE2C product
✓ Confirm the compatible terminal base, output configuration and installation requirements before ordering

In Stock & Available to Order

Allen-Bradley 1734-OE2C is marked in stock based on the supplied inventory information. This POINT I/O two-channel analog current output module is available for industrial automation maintenance, PLC distributed I/O system expansion, replacement and project sourcing inquiries. The actual product and packaging photographs confirm Series C, firmware revision 3.006 and matching serial number 335928. The module supports configurable 4-20mA and 0-20mA analog current outputs and requires compatible POINT I/O system hardware. Please confirm the exact catalog number, series compatibility, signal configuration, installation accessories, required quantity and dispatch arrangements before completing an order.

IN STOCK

Allen-Bradley 1734-OE2C

Contact us for exact-model verification, multiple units and project sourcing. Please confirm the two-channel 4-20mA / 0-20mA analog output configuration, 24V DC field supply, Series C compatibility and POINT I/O terminal base requirements before ordering.

Request Bulk Pricing

Looking for other Allen-Bradley industrial automation products?

Explore Allen-Bradley Industrial Automation Products
Ver todos los detalles

PRODUCT CATEGORY