YingZhou Industrial Automation | Product Information
Delta AS-FCOPM AS300 CANopen Communication Function Card
CANopen DS301 | Master / Slave | 64 Slave Nodes | 20kbps-1Mbps | Card 2
|
Specification
|
Product Data
|
| Brand |
Delta Electronics |
| Exact Model |
AS-FCOPM |
| Product Family |
AS Series PLC Accessories |
| Product Type |
CANopen Communication Function Card |
| Primary Compatible PLC |
Delta AS300 Series |
| Installation Position |
Function Card 2 Slot |
| Network Protocol |
CANopen |
| CANopen Standard |
DS301 |
| CAN Interface |
CAN Bus Communication Port |
| Communication Channels |
1 CAN Channel |
| CANopen Operating Role |
Master / Slave, According to Configuration |
| Maximum Master Slave Nodes |
Up to 64 |
| Master Data Capacity |
Up to 2000 Bytes, Host Specification |
| Slave PDO Capacity |
Up to 8 PDOs, Host Specification |
| Process Data Object |
PDO Supported |
| Service Data Object |
SDO Supported |
| Network Management |
NMT Supported |
| Emergency Messages |
Supported |
| CAN Signal Terminals |
CAN_H / CAN_L / GND |
| CANopen Bit Rates |
20 / 50 / 125 / 250 / 500 / 1000kbps |
| Maximum Bit Rate |
1Mbps |
| Maximum Network Distance at 20kbps |
2500m |
| Maximum Network Distance at 50kbps |
1000m |
| Maximum Network Distance at 125kbps |
500m |
| Maximum Network Distance at 250kbps |
250m |
| Maximum Network Distance at 500kbps |
100m |
| Maximum Network Distance at 1Mbps |
25m |
| CAN Termination |
120 Ohm at Network Endpoints |
| Onboard Termination Resistor |
120 Ohm, Switch Selectable |
| Recommended Network Cable |
Shielded CAN Communication Cable |
| Delta Cable Reference |
UC-DN01Z Series |
| Network Structure |
CAN Bus / Line Topology |
| PLC Programming Software |
Delta ISPSoft |
| Function Card Configuration |
HWCONFIG |
| CANopen Station Address |
Configurable in Applicable Host Mode |
| Communication Bit Rate Setting |
Configured Through Host Software |
| CANopen DS301 Working Mode |
Supported |
| AS Remote Communication |
Supported in Documented Configuration |
| Delta Servo Communication |
Supported in Documented Special Working Mode |
| Additional Host Application |
AS00SCM-A, Subject to Host Configuration |
| Internal Connection |
AS300 Function Card Connector |
| Mounting Method |
Installed in Compatible Function Card Slot |
| Standalone Network Gateway |
No - PLC Function Card Accessory |
Product Overview
The Delta AS-FCOPM is a
CANopen communication function card
designed for compatible
Delta AS300 Series programmable logic controllers.
The card provides an additional CANopen communication
interface and must be installed in the
Function Card 2 slot of a supported AS300 PLC.
It supports CANopen DS301
and configurable master or slave communication
according to the selected host working mode.
In the supported DS301 master configuration,
the controller can manage up to 64 slave nodes.
CANopen communication rates range from
20kbps to 1Mbps, with the maximum cable length
depending on the configured bit rate.
The card also supports documented Delta
remote I/O and servo communication modes.
Configuration is performed through
ISPSoft / HWCONFIG.
The AS-FCOPM is a PLC function card and is not
a standalone CANopen gateway or independent DIN-rail module.
Key Product Features
-
Dedicated CANopen communication interface
for compatible Delta AS300 PLC systems
-
CANopen DS301 master and slave operation
with configuration-dependent network roles
-
Up to 64 slave nodes
in supported CANopen DS301 master applications
-
20kbps to 1Mbps communication speeds
for different CAN bus network requirements
-
Selectable 120-ohm CAN bus termination
for appropriate network endpoint installation
-
Delta remote I/O and servo integration
through documented CANopen working modes
-
ISPSoft / HWCONFIG configuration
and dedicated AS300 Function Card 2 installation
Actual Product Verification
✓
Actual product photos
✓
Delta packaging model label visible:
AS-FCOPM
✓
Packaging shown with product identification
and quantity marking
✓
Actual function card housing, mounting latch
and internal connection board shown
✓
Product appearance shown for buyer verification
✓
Verify the exact model, compatible AS300 PLC,
Function Card 2 installation and CANopen
network configuration before ordering
In Stock & Ready to Order
Delta AS-FCOPM is currently in stock.
Actual product and packaging photos are available
for buyer reference.
Please confirm the exact model,
Delta AS300 PLC compatibility,
required CANopen DS301 master or slave mode,
Function Card 2 slot,
communication bit rate, CAN bus wiring
and network termination before ordering.
