Schneider
Schneider Electric BSH0702P01A2A Lexium BSH 2.2Nm 70mm SinCos Single-Turn Servo Motor
Schneider Electric BSH0702P01A2A Lexium BSH 2.2Nm 70mm SinCos Single-Turn Servo Motor
Couldn't load pickup availability
Schneider Electric BSH0702P01A2A Lexium BSH Servo Motor
| Specification | Product Data |
|---|---|
| Brand | Schneider Electric |
| Exact Model | BSH0702P01A2A |
| Series | Lexium BSH |
| Device Short Name | BSH |
| Product Type | AC Servo Motor |
| Continuous Stall Torque | 2.2 N·m with LXM32.D12N4 at 3A, 400/480V 3-Phase |
| Continuous Stall Torque with Selected LXM05 Drives | 2.12 N·m |
| Peak Stall Torque | 7.6 N·m with LXM32.D12N4 at 3A, 400/480V 3-Phase |
| Nominal Output Power with LXM32 | 850 W with LXM32.D12N4 at 3A, 400/480V 3-Phase |
| Nominal Output Power with Selected LXM05 Drives | 600 W in Specified Configurations |
| Nominal Torque with LXM32 | 1.64 N·m with LXM32.D12N4 at 3A, 400/480V 3-Phase |
| Nominal Speed with Selected LXM05 Drives | 3000 rpm |
| Nominal Speed with LXM32.D12N4 | 5000 rpm at 400/480V 3-Phase |
| Nominal Speed with LXM15LD10N4 | 6000 rpm at 400V 3-Phase |
| Maximum Mechanical Speed | 8000 rpm |
| Continuous Stall Current | 2.9 A |
| Maximum Current (Irms) | 11.8 A with Listed Compatible Drives |
| Maximum Supply Voltage | 480 V |
| Number of Phases | 3 |
| Feedback Type | Single-Turn SinCos Hiperface |
| Speed Feedback Resolution | 131072 Points/Turn |
| Holding Brake | Without Brake |
| Shaft End | Untapped |
| Second Shaft | Without Second Shaft End |
| Shaft Diameter | 11 mm |
| Shaft Length | 23 mm |
| Motor Flange Size | 70 mm |
| Mounting Support | International Standard Flange |
| Electrical Connection | Rotatable Right-Angled Connectors |
| IP Degree of Protection | IP50 Standard |
| Number of Motor Stacks | 2 |
| Torque Constant | 0.77 N·m/A at 120°C |
| Back EMF Constant | 48 V/krpm at 120°C |
| Rotor Inertia | 0.41 kg·cm² |
| Stator Resistance | 4.2 Ohm at 20°C |
| Stator Inductance | 10.65 mH at 20°C |
| Stator Electrical Time Constant | 4.52 ms at 20°C |
| Maximum Radial Force | 490 N at 3000 rpm |
| Maximum Axial Force | 0.2 × Maximum Radial Force |
| Cooling Type | Natural Convection |
| Motor Length | 187 mm |
| Centring Collar Diameter | 60 mm |
| Centring Collar Depth | 2.5 mm |
| Number of Mounting Holes | 4 |
| Mounting Hole Diameter | 5.5 mm |
| Mounting Hole Circle Diameter | 82 mm |
| Net Weight | 2.89 kg |
| Compatible Drive Families | Selected Lexium 05 / Lexium 15 / Lexium 32 Models |
| GTIN / EAN on Packaging | 3389118136199 |
Product Overview
The Schneider Electric BSH0702P01A2A is an AC servo motor from the Lexium BSH motor range. This model features a 70mm motor flange, an untapped shaft, a SinCos Hiperface single-turn feedback system and a without-brake configuration. The motor provides 2.2 N·m continuous stall torque with the manufacturer's specified LXM32.D12N4 drive configuration at 3A and 400/480V three-phase supply. Nominal speed, output power and operating torque depend on the selected compatible servo drive and its electrical operating conditions. The motor has a maximum mechanical speed of 8000rpm, an IP50 standard protection rating and rotatable right-angled electrical connectors. Please confirm the complete motor model, feedback configuration, shaft requirements and compatible drive before ordering.
Key Product Features
- Schneider Lexium BSH servo motor for specified compatible Lexium servo drive systems
- 2.2 N·m continuous stall torque with LXM32.D12N4 at 3A and 400/480V three-phase supply
- 70mm motor flange with 11mm shaft diameter and untapped shaft end
- SinCos Hiperface single-turn feedback for compatible closed-loop servo control
- Without holding brake as specified for exact model BSH0702P01A2A
- IP50 standard protection rating with natural convection cooling
- 8000rpm maximum mechanical speed with nominal operating speed determined by the compatible drive configuration
- Rotatable right-angled connectors for the specified motor electrical connections
Actual Product Verification
Available to Order — Estimated Delivery 3–4 Weeks
Schneider Electric BSH0702P01A2A is available to order with an estimated delivery period of 3–4 weeks. Actual product and packaging photos are available for buyer verification. This Lexium BSH servo motor features a 2.2 N·m continuous stall torque rating under the specified LXM32.D12N4 conditions, 70mm flange, SinCos Hiperface single-turn feedback, without holding brake and IP50 standard protection. Please confirm the exact motor model, servo drive configuration, feedback type, shaft dimensions, brake requirements and quantity before purchasing. Contact our team to confirm delivery and international shipping arrangements.
Schneider Electric BSH0702P01A2A
Contact us for project pricing, quantity requirements and delivery confirmation.
Request Project PricingLooking for other Schneider Electric automation products?
Explore Schneider Electric ProductsShare
