Passer aux informations produits
1 de 6

Delta

Delta CTA4100A CTA Series 48x48mm Timer Counter Tachometer 100-240VAC 6-Digit LCD NPN PNP Dual Relay Outputs

Delta CTA4100A CTA Series 48x48mm Timer Counter Tachometer 100-240VAC 6-Digit LCD NPN PNP Dual Relay Outputs

Prix habituel $42.99 USD
Prix habituel Prix promotionnel $42.99 USD
En vente Épuisé
Model Number
YingZhou Industrial Automation | Product Information

Delta CTA4100A CTA Series Timer Counter Tachometer

48 × 48mm | 100–240VAC | 6-Digit LCD | NPN / PNP | Relay Outputs
✓ IN STOCK & READY TO ORDER  |  Exact Model: CTA4100A  |  Actual Product Photos
Specification Product Data
Brand Delta Electronics
Exact Model CTA4100A
Series CTA Series
Product Type Timer / Counter / Tachometer
Primary Functions Timing, Counting and Speed Measurement
Operating Modes Timer / Counter / Tachometer / Timer + Counter
Panel Size 48 × 48mm (1/16 DIN)
Display Type Double-Line 6-Digit LCD
Display Information Present Value (PV) / Set Value (SV)
Power Supply 100–240VAC, 50/60Hz
Input Voltage Range 85%–110% of Rated Voltage
Power Consumption Less Than 10VA
External Sensor Supply 12VDC ±10%, 100mA
Input Signal Types NPN / PNP
NPN Non-Voltage Input ON Impedance ≤1kΩ; Residual Voltage ≤2V
PNP Voltage Input - High Level 4.5–30VDC
PNP Voltage Input - Low Level 0–2VDC
Maximum Counting Speed 10,000 Counts per Second (10kcps)
Selectable Counting Speeds 1 / 30 / 200 / 1k / 5k / 10k cps
Counter Modes Single-Stage / Two-Stage / Batch / Total / Dual
Preset Stages Two-Stage Configuration
Timer Direction Count Up / Count Down
Timer Units Milliseconds / Seconds / Minutes / Combined Time Units
Pre-Scale Function Supported
Decimal Point Setting Configurable
Output 1 Relay SPST, 250VAC / 5A, Resistive Load
Output 1 Transistor NPN Open Collector
Output 1 Transistor Reference 100mA / 30VDC; Residual Voltage ≤1.5VDC
Output 1 Relay / Transistor Operation Simultaneous Operation Supported
Output 2 Type SPDT Relay
Output 2 Relay Rating 250VAC / 5A, Resistive Load
Output 2 Transistor Not Included on CTA4100A
Communication None — No RS-485
Parameter Setup Front Panel / DIP Switch
Control Keys MODE / UP-DOWN / RESET / LOCK
Operating Temperature 0°C to +50°C
Storage Temperature −20°C to +65°C
Operating Humidity 35%–85% RH, Non-condensing
Dielectric Strength 2000VAC, 50/60Hz, 1 Minute
Maximum Installation Altitude 2000m
Pollution Degree 2
Mounting Method Panel Mount with Fixing Brackets

Product Overview

The Delta CTA4100A is a 3-in-1 industrial timer, counter and tachometer from Delta's CTA Series. It combines timing, event counting and rotational speed measurement in one compact 48 × 48mm panel-mount unit. The controller features a double-line, 6-digit LCD display and operates from a 100–240VAC, 50/60Hz power supply. It accepts both NPN and PNP input signals and offers selectable counting speeds up to 10,000 counts per second. The CTA4100A provides an SPST relay and NPN transistor on Output 1, together with an SPDT relay on Output 2. Additional functions include batch counting, total counting, pre-scaling, two-stage presets and a mixed timer/counter mode. This exact model does not include RS-485 communication.

Key Product Features

  • 3-in-1 timer, counter and tachometer with additional mixed timer/counter operation
  • 48 × 48mm panel-mount design with a double-line, six-digit LCD display
  • 100–240VAC, 50/60Hz power input with less than 10VA power consumption
  • NPN / PNP signal input support and a 12VDC sensor supply rated at 100mA
  • Up to 10k counts per second with selectable counting speeds and pre-scaling
  • Relay and transistor Output 1 with a separate SPDT relay Output 2
  • Batch counting, total counting and two-stage presets for industrial counting and timing applications

Actual Product Verification

✓ Actual product photos
✓ Product model/nameplate visible: CTA4100A
✓ Product label shows AC 100–240V, 50/60Hz
✓ Actual packaging shown with matching CTA4100A model label
✓ Rear housing, mounting bracket and connection terminals shown
✓ Verify the exact model, supply voltage, input signal type, relay output configuration and installation dimensions before ordering

In Stock & Ready to Order

Delta CTA4100A is currently in stock. Actual product and packaging photos are available for buyer reference. Please confirm the exact model, 100–240VAC power supply, NPN / PNP input requirements, OUT1 / OUT2 relay configuration and panel mounting dimensions before ordering.

IN STOCK

Delta CTA4100A

Order online or contact us for project and quantity pricing.

Request Project Pricing

Looking for other Delta industrial automation products?

Explore Delta Industrial Automation Products
Afficher tous les détails